770-003B103W1

SERIES 77 Lipped, 45° Angle Shrink Boots 770-003B Angled Boot How to Order 45° Boots Lipped, 45° angle heat shrink boots provide mechanical and environmental protection from damage and debris. These shrink boots fit most standard boot adapters for circular connectors. All adhesive lined and unlined shrink books are RoHS compliant. Shrink boots are water-tight when equipped with factory installed or user-installed adhesive. Lipped boots lock into boot groove located on adapter. Choose boot size based on adapter diameter and cable diameter. Sample Part Number 770 Product Series 770 = Series 77 shrink boot Basic Number 003 = lipped, boot Angular Function B = 45° Material See material and adhesive compatibility table Boot Size 03, 04, 05, 06, 07; see dimensions table Adhesive Lined Omit for no adhesive; see material and adhesive compatibility table Potting Port PP = potting port  Omit for none -003 B 1 03 W1 -PP Material and Adhesive Compatibility Material Code C How to Order 1 2 3 5 6 7 8 9 Material Description (Compound No.) W1 High Temperature -55°C to 125°C Hot Melt Adhesives W2 W3 (TACOM approved) Standard Elastomeric -55°C to 70°C -55°C to 125°C High Performance Epoxy Adhesives R U Pre-Coat Two-Part -75°C to 150°C -75°C to 155°C High-Performance Semi-Rigid Elastomer (2025) Zero Halogen Semi-Rigid Polyolefin (2010) General Purpose Flexible Polyolefin (2040) Viton Fluoroelastomer Blend (2050) High Performance Elastomer Alloy (2051) Semi-Rigid Polyolefin (2071) Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive. Use Type U two-part epoxy Low Temp Flexible Polyolefin (2013) Type U epoxy adhesive is compatible with all boot materials. Ordered separately, user-installed (779-001). Order boot with no adhesive lining. NOTES 1. See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material. C-36 © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, 45° Angle Shrink Boots 770-003B Angled Boot Dimensions Lipped 45° Angle Shrink Boots: Dimensions R at P Ce Ae 45° Boots ø.12 POTTING PORT (IF REQUIRED) Ar CO C ct AS SUPPLIED RECOVERED Cr Dimensions Boot Size 03 04 05 06 07 Glenair US Part Marking B03 B04 B05 B06 B07 Shell Size 9 11 - 15 13 - 17 17 - 21 21 - 23 Ae Dia. Min Ce Dia. Min Ar Dia Max .945 (24.0) 1.181 (30.0) 1.260 (32.0) 1.417 (36.0) 1.693 (43.0) .945 (24.0) .413 (10.5) 1.181 (30.0) .551 (14.0) 1.260 (32.0) .709 (18.0) 1.417 (36.0) .866 (22.0) 1.693 (43.0) 1.102 (28.0) at ±30% Cr Dia. Max ct ±20% CO Ref .063 (1.6) .071 (1.8) .079 (2.0) .079 (2.0) .087 (2.2) .157 (4.0) .236 (6.0) .276 (7.0) .335 (8.5) .394 (10.0) .035 (0.9) .039 (1.0) .071 (1.8) .071 (1.8) .079 (2.0) .315 (8.0) .354 (9.0) .591 (15.0) .709 (18.0) .709 (18.0) P ±10% R Ref .748 (19.0) .500 (12.7) 1.180 (30.0) .748 (19.0) 1.378 (35.0) .984 (25.0) 1.575 (40.0) 1.260 (32.0) 1.772 (45.0) 1.496 (38.0) Lipped 45° Angle Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED BO3 BO3 BOOT SIZE CODE LETTER “B” INDICATES 45° BOOT A A LETTER “A” INDICATES ADAPTER (CONNECTOR) END GL LETTER “C” INDICATES CABLE END EN AI R C © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. C-37