770-003S303

SERIES 77 Lipped, Straight Shrink Boots 770-003S Straight Boot, without Eyelet How to Order Straight Boots Lipped, straight shrink boots provide mechanical and environmental protection from damage and debris. Standard boots are available in eight material options with five adhesive choices. Glenair straight boots fit most standard boot adapters for circular connectors. All adhesive lined and unlined shrink books are RoHS compliant. Shrink boots are water-tight when equipped with factory installed or user-installed adhesive. Lipped boots lock into boot groove located on adapter and can be ordered with potting holes or drain holes according to your requirements. Choose boot size based on adapter diameter and cable diameter. How to Order Sample Part Number 770 -003 S 1 03 Product Series 770 = Series 77 shrink boot Basic Number 003 = lipped boot Angular Function S = straight Material See material and adhesives table Boot Size 00S, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12; see shell size cross reference in dimensions table Adhesive Lined Omit for no adhesive; see material and adhesives table Potting Ports or Drain Holes PP = potting port DH = drain hole W1 -PP Omit for none Material and Adhesive Compatibility Material Code C 1 2 3 5 6 7 8 9 Material Description (Compound No.) W1 High Temperature -55°C to 125°C Hot Melt Adhesives W2 W3 (TACOM approved) Standard Elastomeric -55°C to 70°C -55°C to 125°C High Performance Epoxy Adhesives R U Pre-Coat Two-Part -75°C to 150°C -75°C to 155°C High-Performance Semi-Rigid Elastomer (2025) Zero Halogen Semi-Rigid Polyolefin (2010) General Purpose Flexible Polyolefin (2040) Viton Fluoroelastomer Blend (2050) High Performance Elastomer Alloy (2051) Semi-Rigid Polyolefin (2071) Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive. Use Type U two-part epoxy Low Temp Flexible Polyolefin (2013) Type U epoxy adhesive is compatible with all boot materials. Ordered separately, user-installed (779-001). Order boot with no adhesive lining. NOTES 1. See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material. C-6 © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, Straight Shrink Boots 770-003S Straight Boot, without Eyelet Dimensions Lipped Straight Adapter Shrink Boots, Standard: Dimensions P0 Ce Ae Straight Boots Potting Port (If Req’d) R0 at Ar Cr Ct C0 R0 Recovered (-003) As Supplied C 770-003 Dimensions Table Boot Glenair Us AS85049 Shell Ae DIA Ce DIA Ar DIA Size Part /140 Size MIN MIN MAX Marking Ref 00S 00S 5 .354 (9.0) .354 (9.0) .217 (5.5) 00 S00 5 .354 (9.0) .354 (9.0) .217 (5.5) 01 S01 5,6 .472 (12.0) .472 (12.0) .276 (7.0) 02 S02 6,7 .669 (17.0) .669 (17.0) .276 (7.0) 03 S03 01 8,10 .945 (24.0) .945 (24.0) .413 (10.5) 04 S04 02 11-16 1.181 (30.0) 1.181 (30.0) .551 (14.0) 05 S05 03 16-17 1.260 (32.0) 1.260 (32.0) .709 (18.0) 06 S06 04 17-21 1.417 (36.0) 1.417 (36.0) .866 (22.0) 07 S07 05 21-23 1.693 (43.0) 1.693 (43.0) 1.102 (28.0) 08 S08 06 25 2.362 (60.0) 2.362 (60.0) 1.378 (35.0) 09 S09 07 2.599 (66.0) 2.599 (66.0) 1.752 (44.5) 10 S10 08 3.400 (86.4) 3.400 (86.4) 2.250 (57.2) 11 S11 5,6 .472 (12.0) .472 (12.0) .276 (7.0) 12 S12 6,7 .669 (17.0) .669 (17.0) .375 (9.5) at ±30% Cr DIA MAX ct ±20% .039 (1.0) .039 (1.0) .043 (1.1) .051 (1.3) .063 (1.6) .071 (1.8) .071 (1.8) .079 (2.0) .087 (2.2) .130 (3.3) .150 (3.8) .160 (4.1) .043 (1.1) .051 (1.3) .079 (2.0) .079 (2.0) .118 (3.0) .138 (3.5) .197 (5.0) .236 (6.0) .276 (7.0) .335 (8.5) .394 (10.0) .591 (15.0) .661 (16.8) 1.06 (26.9) .093 (2.4) .187 (4.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .035 (0.9) .039 (1.0) .047 (1.2) .047 (1.2) .051 (1.3) .063 (1.6) .079 (2.0) .130 (3.3) .028 (0.7) .028 (0.7) CO REF PO ±10% .295 (7.5) .630 Max (16) .295 (7.5) .984 (25.0) .295 (7.5) .984 (25.0) .394 (10.0) 1.181 (30.0) .394 (10.0) 1.496 (38.0) .630 (16.0) 2.165 (55.0) .748 (19.0) 2.638 (67.0) .787 (20.0) 3.150 (80.0) 1.142 (29.0) 3.898 (99.0) 1.575 (40.0) 5.118 (130.0) 2.283 (58.0) 6.693 (170.0) 2.068 (52.5) 7.700 (195.6) .354 (9.0) 1.417 (36.0) .394 (10.0) 1.496 (38.0) RO REF .385 (9.8) .551 (14.0) .551 (14.0) .728 (18.5) .748 (19.0) 1.181 (30.0) 1.299 (33.0) 1.575 (40.0) 2.165 (55.0) 1.969 (50.0) 3.543 (90.0) 4.005 (102.0) .750 (19.1) .750 (19.1) For materials Type 2, Type 3 and Type 9, dimension 'Ce' is nominal Lipped Straight Shrink Boots: Part Marking, Raised Lettering RECOVERED EXPANDED BOOT SIZE CODE LETTER “S” INDICATES STRAIGHT BOOT LETTER “C” INDICATES CABLE END LETTER “A” INDICATES ADAPTER (CONNECTOR) END © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. C-7