Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
BoARD MoUNt PLUGS, SoCKEt CoNtACtS, 90° PCB tERMINAtIoN, 790-042S
Free-standing rugged right angle headers feature gold-plated PC tail contacts for thru-hole printed circuit board termination. Not for panel mounting. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. EMI shroud improves shielding performance. Threaded board mounting holes and integral standoffs simplify installation. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. Optional EMI spring improves shell-to-shell conductivity and shielding performance. Mates with 790-024p cable receptacles.
790-042S
Part Number
Right Angle Plug with 90° PC Tail Contacts for Termination to Backplanes or Flexible Circuits
L-6P6
Shell Size Insert Arr.
See Table 1 for Available Insert Arrangements
M
Sample Part Number
HOW TO ORDER
E
P
Hardware Option
A
PC Tail Length
.125 Inch (3.2 mm.)
Shell Finish
Electroless Nickel
general purpose applications
EMI Spring
EMI Spring
790-042S
M
E
A B
1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey)
Nickel-PTFE
MT
No Spring
EMI SPRING
N
No Hardware
N
.250 inch (6.4 mm.)
tactical applications (non-reflective black)
Zinc-Nickel with Black Chromate
ZNU
PC TAIL LENGTH
Female Jackpost
P
Additional shell finishes are listed on page C-9.
SPECIFICATIONS
Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g.
MATERIALS AND FINISHES
Shell Contacts Insulator PCB Tray EMI Shroud Hardware Panel Gasket Encapsulant Aluminum alloy Copper alloy, gold plated Liquid crystal polymer (LCP) Thermoplastic Aluminum alloy 300 series stainless steel Fluorosilicone, conductive Epoxy
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-21
PCB Connectors
A B C D E F G H
INDEX INDEX
PCB Connectors
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Table 1 Contact Arrangements CRoSS-SECtIoNAL vIEW oF 790-042S
INSULATOR EPOXY 2 9 13 15 3 5 9 19 4 3 2 2 SHELL EMI SHROUD TRAY EMI SPRING SOCKET CONTACT
A B C D E F G H
INDEX INDEX
Layout A-5 B-2P2 B-9 C-13 D-15 D-3P3 D-7P2 E-11P2 E-19 E-7P3
#23 #16 #12 5
Contact Quantity
Face View
TABLE 2 HARDWARE OPTION
F-15P2 13 2 F-23 F-5P5 G-33 h-10P4
33 6 4 23 5
Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is .150" (3.8).
No Mating Hardware
N
Connector is supplied with non-removable stainless steel jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread.
Jackposts
P
h-29P7 22 7 H-36P2 34 h-54P2 52 2 H-5P5 H-66
66 5 2
J-17P4 13 4 J-25P2 23 2 J-33 J-7P7
33 7
K-27P4 23 4 K-35P2 33 2 K-43 K-9P9 L-6P6
© 2009 Glenair, Inc. www.glenair.com 43 9 6 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-22
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-042S DIMENSIoNS: ShELL SIzE A-F, J AND K
A MAX .167 (4.95) B BASIC C MAX .233 (5.92) MAX .228 (5.79) MIN .078 (1.98) MIN PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) JACKPOST, #2-56 CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63)
.500 (12.70) MAX
.183 ± .003 (4.65 ± 0.08)
790-042S ShELL SIzES A-F, J AND K
.540 (13.72) MAX
.410 (10.41)
B BASIC D MAX
Shell Size A B C D E F J K
A Max. In. mm.
.805 .955 1.105 1.205 1.355 1.505 1.855 2.255 20.45 24.26 28.07 30.61 34.42 38.23 47.12 57.28
B Basic In. mm.
.565 .715 .865 .965 1.115 1.265 1.615 2.015 14.35 18.16 21.97 24.51 28.32 32.13 41.02 51.18
C Max. In. mm.
.335 .485 .635 .735 .885 1.035 1.380 1.783 8.51 12.32 16.13 18.67 22.48 26.29 35.05 45.29
790-042S DIMENSIoNS: ShELL SIzE G
1.455 (36.96) MAX .209 (5.31) .530 (13.46) MAX 1.215 B BASIC (30.86) BASIC 1.010 (25.65) MAX .320 (8.13) MAX .228 (5.79) MIN .078 (1.98) MIN
JACKPOST, #2-56 .183 ± .003 (4.65 ± 0.08) .018/.022 (0.46/0.56)
PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35)
.485 (12.62)
.615 (15.62) MAX
1.215 (30.86) BASIC 1.455 (36.96) MAX Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
© 2009 Glenair, Inc. www.glenair.com
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-23
PCB Connectors
A B C D E F G H
INDEX INDEX
PCB Connectors
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-042S DIMENSIoNS: ShELL SIzES h & L
A
#2-56 FLAT HEAD SCREW
B C
.222 (5.64) A MAX B BASIC C .288 (6.05) MIN .088 (2.24) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) JACKPOST, #4-40 CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) #12 CONTACT .096/.092 (2.44/2.34)
.349 (8.86) MAX
D E F G H
INDEX INDEX
.550 (13.97) MAX
.183 ± .003 (4.65 ± 0.08) .491 (12.47)
.700 (17.78) MAX
4-40 UNC-2B X .150 (3.81) MIN 2 PLCS
B BASIC D MAX
790-042S ShELL SIzES h AND L
Shell Size H L A Max. In. mm.
2.185 55.50 2.430 61.72
B Basic In. mm.
1.800 45.72 2.036 51.71
C Max. In. mm.
1.385 35.18 1.623 41.22
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-24
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Hole Patterns for 790-037S and 790-042S Plugs
This section contains printed circuit board footprints for right angle Series 79 plugs. The contact identification numbers are shown for the connector mounting side of the PC board. Contact tails are gold over nickel plated.
CONNECTOR ORIENTATION
Contact Size
#23 #16 #12
PC Tail Diameter Ø Diameter In. mm.
.018-.022 .060-.064 .092-.096 0.46-0.56 1.52-1.63 2.34-2.44
Insert Arr.
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
.565 (14.35) .2825 (7.18) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x)
.003 M A M
A-5
.075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x
.003 M A M
4
5
1
2
3
.0375 (0.95) TYP .715 (18.16) .270 (6.86)
.075 (1.91) TYP
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X)
.003 M A M
B-2P2
.094 ± .003 (2.39 ±0.08) 2x
A1
A2
.003 M A M
.175 (4.45)
.715 (18.16) .3575 (9.08) .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x
.003 M A M
1
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x)
.003 M A M
B-9
6
7
8
9
2
3
4
5
.0375 (0.95) TYP
.075 (1.91) TYP
.865 (21.97) .4325 (10.99) .075 (1.91) TYP
12 13 5 6 7
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x)
.003 M A M
C-13
.094 ± .003 (2.39 ±0.08) 2x
8 1 2
9 3
10 4
11
.003 M A M
.0375 (0.95) TYP
.075 (1.91) TYP
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-25
PCB Connectors
A B C D E F G H
INDEX INDEX
PCB Connectors
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
.965 (24.51) .4825 (12.26) .075 (1.91) TYP
15 6 7 8
A B C
Insert Arr.
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 15x)
.003 M A M
D-15
.094 ± .003 (2.39 ±0.08) 2x
9 1 2
10 3
11 4
12 5
13 14
.003 M A M
.0375 (0.95) TYP
.075 (1.91) TYP
.965 (24.51) .4825 (12.26) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x)
.003 M A M
A2 A3
D-3P3
D E F G H
INDEX INDEX
E-19 E-11P2
.094 ± .003 (2.39 ±0.08) 2x
.175 (4.45) 2x
A1
.003 M A M
.965 (24.51) .4825 (12.26) .075 (1.91) TYP
A1 1 2 3
.205 (5.21) 2X
4 5 A2
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x)
.003 M A M
D-7P2
.094 ± .003 (2.39 ±0.08) 2x
.003 M A M
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X)
T
.003 M A M
.0375 (0.95) TYP 1.115 (28.32)
.075 (1.91) TYP
.5575 (14.16) .075 (1.91) TYP
A1 1 2 3 4
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x)
.003 M A M
.094 ± .003 (2.39 ±0.08) 2x
5
6
7
8
9 A2
.003 M A M
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X)
.003 M A M
.0375 (0.95) TYP .2795 (7.10) 2X
.075 (1.91) TYP
1.115 (28.32) .5575 (14.16) .075 (1.91) TYP
17 18 8 19 7 9 10
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 19x)
.003 M A M
.094 ± .003 (2.39 ±0.08) 2x
11 12 1 2 3
13 14 4
15 16 5 6
.003 M A M
.0375 (0.95) TYP
.075 (1.91) TYP
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-26
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
1.115 (28.32) .5575 (14.16) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 4x)
4 A1 1 A2 A3 2
Insert Arr.
.003 M A M
E-7P3
.094 ± .003 (2.39 ±0.08) 2x
.175 (4.45) 2x
3
.003 M A M
.0375 (0.95) 2x 1.265 (32.13) .6325 (16.07)
.2975 (7.56) 2x
.075 (1.91) TYP
F-15P2
.094 ± .003 (2.39 ±0.08) 2x
7 A1 1
8 2
9 3
10 4
11 12 5
.075 (1.91) TYP
13 A2 6
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x)
.003 M A M
.003 M A M
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x)
.003 M A M
.352 (8.94) 2X
.0375 (0.95) TYP
.075 (1.91) TYP
1.265 (32.13) .6325 (16.07) .075 (1.91) TYP
20 9
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x)
.003 M A M
F-23
.094 ± .003 (2.39 ±0.08) 2x
13 14 1 2 3
15 16 4 5
17 18 7
19 8
21 22 23 10 11 12
.003 M A M
6
.0375 (0.95) TYP 1.265 (32.13) .6325 (16.07) .094 ± .003 (2.39 ±0.08) 2x
A1 A2 A3 A4 A5
.075 (1.91) TYP
F-5P5
.003 M A M
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x)
.003 M A M
.175 (4.45) 4x
1.215 (30.86) .6075 (15.43)
24 25 26 27 28 29 19 7
.075 (1.91) TYP
30 20 8 31 32 33 17 18 5 6 21 22 23 9 10 11 12
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x)
.003 M A M
G-33
.094 ± .003 (2.39 ±0.08) 2x
13 1
14 2
15 16 3 4
.003 M A M
.0375 (0.95) TYP
.075 (1.91) TYP
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-27
PCB Connectors
A B C D E F G H
INDEX INDEX
PCB Connectors
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
.900 (22.86) 1.800 (45.72) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 6x)
5 3 1 2 A3
A B C
Insert Arr.
.075 (1.91) TYP
H-10P4
.125 ± .003 (3.18 ±0.08) 2x
.003 M A M
.0375 (0.95) TYP
A1 A2
6 4
.003 M A M
A4
.236 (5.99) TYP
.075 (1.91) TYP .472 (11.99) 1.800 (45.72)
TYP
(HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 4x) .003 M A M
.290 (7.37) .125 ± .003 (3.18 ±0.08) 2x
.003 M A M
.900 (22.86) TYP .175 (4.45)
A1 1 2 3 4 5 6 A2 7 8 9 A3 10 11 12 A4 13 14 15
.6125
A5 16 17 18 A6 19 20 21 A7
.175 (4.45) TYP
22
.075 (1.91) TYP
H-29P7
D E F G H
H-5P5 H-54P2
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x)
.003 M A M
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 22x)
.003 M A M
.050 (1.27) TYP .075 (1.91) TYP .100 (2.54) TYP
1.800 (45.72) .900 (22.86)
26 27 28 29 19 20 30 31
.075 (1.91) TYP
32 33 34 A2 18 9 1 21 22 23 13 14 4 5 24 25 15 16 6 7 8 17
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 34x)
.003 M A M
.075 (1.91) TYP
H-36P2
.125 ± .003 (3.18 ±0.08) 2x
.003 M A M
A1
10 11 12 2 3
.1725 (4.38)
.0375 (0.95)
.472 (11.99)
(HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 2x)
.003 M A M
.944 (23.98) 1.800 (45.72) .900 (22.86)
40 41 42 43 30 17 3 4 44 31 18 5 45 46 47 34 22 8 9
.580 (14.73)
48 49 50 51 38 52 39 27 A2 32 33 19 20 6 7 35 36 23 37 24
.075 (1.91) TYP
.125 ± .003 (3.18 ±0.08) 2x
.003 M A M
28 29 A1 1 15 16 2
21
25
26
10 11 12
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 52x)
.003 M A M
.0375 (0.95) TYP .075 (1.91) TYP
13 14
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x)
.003 M A M
1.160 (29.46 1.800 (45.72) .900 (22.86)
.125 ± .003 (3.18 ±0.08) 2x
.003 M A M
INDEX INDEX
A1
A2
A3
A4
A5
.236 (5.99) 4x
(HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 5x)
.003 M A M
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-28
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
1.800 (45.72) .900 (22.86)
50 51 52 53 54 55 38 39 56 57 40 58 41 59 60 42 61 62 63 46 47 30 31 64 65 66 48 49 32 33
Insert Arr.
.075 (1.91) TYP
H-66
.125 ± .003 (3.18 ±0.08) 2x
.003 M A M
34 35 17 18 1 2 19
36 37 20 4
43 44
45
21 22 23 5 6 7
24 25 8 9
26 27 10 11
28 29 12
3
13 14
15 16
.0375 (0.95) TYP
.075 (1.91) TYP
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 66x)
.003 M A M
1.615 (41.02) .8075 (20.51) .075 (1.91) TYP
8 9 A1 A2 1 2 3 4 5 6 7
.3725 (9.46)
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x)
.003 M A M
J-17P4
.094 ± .003 (2.39 ±0.08) 2x
10 11 12
13 A3 A4
.003 M A M
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x)
.003 M A M
.0375 (0.95) TYP
.175 (4.45) TYP 1.615 (41.02)
.075 (1.91) TYP
.8075 (20.51)
.5475 (13.91) .075 (1.91) TYP
J-25P2
.094 ± .003 (2.39 ±0.08) 2x
13 14 A1 1 2 3
15 16
17 18
19
20
21 22 23 A2
.003 M A M
4
56
7
8
9
10 11 12
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x)
.003 M A M
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x)
.003 M A M
.0375 (0.95) TYP
.075 (1.91) TYP
1.615 (41.02) .8075 (20.51) .075 (1.91) TYP
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x)
.003 M A M
33 17
J-33
.094 ± .003 (2.39 ±0.08) 2x
18 1 2
19 20 3 4
21 22 23 5 6
24 7
25 9
26 27 28 10 11
29 12 13
30 31 32 14 15 16
.003 M A M
8
.075 (1.91) .0375 (0.95) TYP 1.615 (41.02) .8075 (20.51)
J-7P7
.094 ± .003 (2.39 ±0.08) 2x
.003 M A M
A1
A2
A3
A4
A5
A6
A7
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x)
.003 M A M
.175 (4.45) 6x
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-29
PCB Connectors
A B C D E F G H
INDEX INDEX
PCB Connectors
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page
2.015 (51.18) .0375 (0.95) TYP .075 (1.91) TYP
15 16 4 17 3 5 6
A B C
Insert Arr.
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x)
19 7 8 20 9 21 22 23 10 11 12
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x)
.003 M A M
k-27P4
.094 ± .003 (2.39 ±0.08) 2x
13 14 A1 A2 1 2
18
.003 M A M
A4
.003 M A M
A3
.075 (1.91) TYP .1.0075 (25.59) .5755 (14.62) .175 (4.45) TYP
2.015 (51.18) .1.0075 (25.59) .075 (1.91) TYP
24 5 6 7 8
(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x)
.003 M A M
31 32 33 A2 15 16 17 30
k-35P2
.094 ± .003 (2.39 ±0.08) 2x
18 A1 1 2
19 3
20 4
21 22 23
25 9
26 27 28 29 10 11
.003 M A M
D E F G H
k-9P9
12 13 14
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x)
.003 M A M
.0375 (0.95) TYP
.075 (1.91) .750 (19.05) 2x (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 43x)
40 41 19 42 20 43 21 22
2.015 (51.18) .0375 (0.95) TYP .220 (5.59) .075 (1.91) TYP
23 1 24 25 2 3 26 4 5 27 28 6 29 7 30 8 9 31 10 32 33 11 12 34 35 36 37 38 39
k-43
.094 ± .003 (2.39 ±0.08) 2x
.003 M A M
13 14 15 16
17 18
.1.0075 (25.59)
.075 (1.91) TYP
2.015 (51.18)
.1.0075 (25.59) .094 ± .003 (2.39 ±0.08) 2x
A1 A2 A3 A4 A5 A6 A7
(HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 9x)
.003 M A M
A8 A9
.003 M A M
.175 (4.45) 2.036 (51.71) .428 (10.87) .125 ± .003 (3.18 ±0.08) 2x
A1 A2 A3 A4 A5 A6
INDEX
L-6P6
.003 M A M
.236 (5.99) 5x
(HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 6x)
.003 M A M
© 2009 Glenair, Inc. www.glenair.com
Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Rev. 04-July-2009
G-30
