801-007-16M9-210PA

Series 801 Series 801 Mighty Mouse Double-Start ACME Thread Plug with Crimp Contacts 801-007 and 801-008 Ordering Information Series 801 Mighty Mouse Connector features a double-start stub ACME thread for improved protection against cross-mating and thread damage. Connector shells are machined aluminum or stainless steel. Supplied with crimp contacts, packaged separately. Terminate contacts with standard M22520 tools. Metal clips inside the connector body lock contact into place. Contacts are removable. Fluorosilicone seals and rear grommet protect connector from water ingress. Terminate cable shield directly to band platform with Band-Master™ ATS strap or choose rear accessory thread to attach optional cable clamp or backshell. How To Order Sample Part Number D 801-007 -16 M 9-4 Series (See Table I) 801-007 = With Banding Platform 801-008 = With Rear Accessory Thread Shell Style -16 = Plug with Anti-Decoupling Spring -26 = Self-Locking Plug with Ratchet Mechanism Shell Material and Finish C = Aluminum / Black Anodize (Non-Conductive) M = Aluminum / Electroless Nickel NF = Aluminum / Cadmium with Olive Drab Chromate ZN = Aluminum / Zinc-Nickel with Olive Drab Chromate ZNU = Aluminum / Zinc-Nickel with Black Chromate MT = Aluminum / Nickel-PTFE Z1 = Stainless Steel / Passivated Shell Size - Insert Arrangement See Contact Arrangements page D-3 Contact Type Connector supplied Connector supplied Connector supplied with crimp contacts without contacts with 30 AWG crimp contacts P = Pin A = Pin Connector G = #23 Pin S = Socket B = Socket Connector H = #23 Socket Connectors with signal and/or power crimp contacts are not installed. Coaxial contacts and non-standard signal contacts are ordered separately. Polarization (See Table II) A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. E  F = Pos. F  G = Pos. G  H = Pos. H  J = Pos. J NOTES A Table II: Key Positions Table I: Series 1. Contacts are crimp type, and used in a rear release retention system 2. Plug mates with all quick coupling high density receptacle connectors with same polarization and opposite contact gender (801-003 through 801-006 and 801-009 through 801-012) 3. Connectors supplied with standard crimp contacts. For coax or other special contacts, order connector less contacts and and order contacts separately 4. For all insert arrangements with size #8 contacts, add .320” to overall length. For -26 shell style, add .127”. For both, add .447” P B° A° 801-007 Banding Platform 801-008 Rear Accessory Thread Position A B C D E F A° 150° 75° 95° 140° 75° 95° B° 210° 210° 230° 275° 275° 210° Dimensions in Inches (millimeters) are subject to change without notice. © 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-12 Rev. 08.17.20 E-Mail: sales@glenair.com Series 801 Series 801 Mighty Mouse Double-Start ACME Thread Plug with Crimp Contacts 801-007 and 801-008 Dimensions Plug connector 1.130 MAX 2 SAFETY WIRE HOLES AT 180° B THREAD B THREAD 1.090 MAX MASTER KEY SHIELD TERMINATION PLATFORM øA øC D THREAD STRAIGHT KNURL Integral Band Platform 801-007 Accessory Thread 801-008 FACE VIEW OF PLUG AS VIEWED FROM ENGAING END. SOCKET SIZE 9 SHOWN D Dimensions Shell Size 5 6 7 8 9 10 11 13 16 17 19 21 Ø A Style 16 Ø A Style 26 B Thread ØC D Thread 0.54 (13.72) 0.60 (15.24) 0.69 (17.53) 0.75 (19.05) 0.81 (20.57) 0.88 (22.35) 0.92 (23.37) 1.05 (26.67) 1.24 (31.50) 1.30 (33.02) 1.40 (35.56) 1.55 (39.37) 0.65 (16.51) 0.69 (17.53) 0.79 (20.07) 0.83 (21.08) 0.92 (23.37) 0.98 (24.89) 1.02 (25.91) 1.10 (27.94) 1.34 (34.04) 1.45 (36.83) 1.50 (38.10) 1.65 (41.91) .3125-.05P-.1L-DS-2B .3750-.05P-.1L-DS-2B .4375-.05P-.1L-DS-2B .5000-.05P-.1L-DS-2B .5625-.05P-.1L-DS-2B .6250-.05P-.1L-DS-2B .6875-.05P-.1L-DS-2B .8125-.1P-.2L-DS-2B 1.0000-.1P-.2L-DS-2B 1.0625-.1P-.2L-DS-2B 1.1875-.1P-.2L-DS-2B 1.3125-.1P-.2L-DS-2B .245 (6.22) .290 (7.37) .390 (9.91) .445 (11.30) .500 (12.70) .560 (14.22) .605 (15.37) .650 (16.51) .805 (20.45) .850 (21.59) 1.003 (25.48) 1.110 (28.19) .2500-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .6875-24 UNEF-2A .9375-20 UNEF-2A .9375-20 UNEF-2A 1.0625-18 UNEF-2A 1.1875-18 UNEF-2A Material / finish: • Plug barrel, coupling nut: Aluminum Alloy or CRES; see How to Order Table • Insulator: High grade rigid dielectric / N.A. • Interfacial seal, grommet seal: fluorosilicone / N.A. • Contact: copper alloy / gold plate per ASTM B 488, Type II, Code C, Class 1.25, over a suitable underplate Dimensions in Inches (millimeters) are subject to change without notice. © 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-13 Rev. 05.23.19 E-Mail: sales@glenair.com