804-003-00NF8-13PA

A B C In-Line 804-003-01 Rear Panel Jam Nut Mount 804-003-07 Front Panel Jam Nut Mount 804-003-00 D E F G H J K L Series 804 Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Receptacles – Crimp Termination Integral Band Platform for direct attachment of a cable shield. Install a boot, or overmold a boot over the band platform. An accessory thread is available for attaching strain reliefs and backshells. Three Shell Options: Jam nut with o-ring for front or rear panel mounting, or in-line receptacles for free-hanging cables. HOW TO ORDER Sample Part Number 804- 0 0 3 Series -01 Shell Style M Shell Material / Finish C Aluminum / Black Anodize 7-10 Shell Size- Insert Arrangement 5-3 6-1 6-4 6-7 7-1 7-10 8-13 9-4 9-19 10-26 12-2 12-37 14-55 15-85 P Contact Type Shell Key Position M -00 804-003 Receptacle with Banding Platform Jam Nut for Front Panel Mounting Aluminum / Electroless Nickel NF Aluminum / Cadmium with Olive Drab Chromate ZN -01 In-Line for FreeHanging Cable Aluminum / ZincNickel with Olive Drab Chromate Standard #23 contacts 3 #23 Contacts Omit accept #22 through 1 #16 Contact for Single #28 AWG wire. Use the Master Key 4 #23 Contacts following contact codes 7 #23 Contacts to specify these contacts: 1 #12 Contact P 10 #23 Contacts A Pin 13 #23 Contacts Pos. A (Normal) 4 #16 Contacts S 19 #23 Contacts Socket 26 #23 Contacts B Special contacts for 2 #12 Contacts Pos. B #26 to #30 AWG are 37 #23 Contacts also available. Use the 55 #23 Contacts following contact codes C 85 #23 Contacts to specify these contacts: Pos. C 804-004 Receptacle with Accessory Thread ZNU Aluminum / Zinc-Nickel with Black Chromate G #23 contacts are packaged with connectors. #16 and #12 contacts must be ordered separately. Pin D Pos. D Z1 -07 Jam Nut for Rear Panel Mounting Stainless Steel / Passivated H Socket © 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-6 Rev. 05-APR-2007 E-Mail: sales@glenair.com Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Receptacles – Jam Nut Rear Panel 1.095 (27.8) REd STRIPE øb KEYWAY C FLAT .275 (7.0) jam nut O-RING SPRING ØF 1.170 (29.7) GROMMET ØG .000 .120 (0.00 3.05) øA d THREAd E THREAd .125 (3.2) MAX PANEL THICKNESS Accessory Thread 804-004-07 Integral Band Platform 804-003-07 DIMENSIoNS Shell Size Size 5 6 7 8 9 10 12 14 15 In. ØA mm. In. ØB mm. C Flat In. mm. D Threads E Threads .2500-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .9375-20 UNEF-2A .9375-20 UNEF-2A In. ØF mm. 11.43 13.21 14.73 15.32 17.65 18.67 22.35 25.65 26.92 In. ØG mm. 6.25 7.26 9.91 11.23 12.70 14.33 16.51 20.45 21.59 .790 .830 .910 .955 1.000 1.085 1.180 1.325 1.390 20.07 .562 21.08 .625 23.11 .750 24.26 .750 25.40 .812 27.48 .875 29.97 1.000 33.66 1.125 35.31 1.188 14.27 .415 15.87 .467 19.05 .594 19.05 .594 20.62 .655 22.22 .721 25.40 .843 28.57 .968 30.17 1.029 10.54 .4375-32 UN-2A 14.40 .5000-32 UN-2A 15.09 .6250-28 UN-2A 15.09 .6250-28 UN-2A 16.64 .6875-28 UN-2A 18.31 .7500-28 UN-2A 21.41 .8750-28 UN-2A 24.59 1.0000-28 UN-2A 26.14 1.0625-20 UN-2A .450 .520 .580 .603 .695 .735 .880 1.010 1.060 .246 .286 .390 .442 .500 .564 .650 .805 .850 ALTERNATE KEY PoSITIoNS JAM NUT PANEL CUToUT A Flat Shell Size Size øb A FLAT 5 6 7 8 9 10 12 14 15 In. In. mm. Pos. A° b° A° 150° 75° 95° 140° B° 210° 210° 230° 275° ± .002 ± 0.05 .425 .477 .604 .604 .665 .731 .853 .978 1.039 In. ØB mm. A b C d 10.80 .448 12.12 .510 15.34 .635 15.34 .635 16.89 .695 18.57 .760 21.67 .885 24.84 1.010 26.39 1.070 11.38 12.95 16.13 16.13 17.65 19.30 22.48 25.65 27.18 © 2007 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Rev. 19-AUG-2008 G-7 Series 804 A B C D E F G H J K L M A B C D E F G H J K REd STRIPE L Series 804 Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Receptacles – Jam Nut Front Panel 1.150 (29.2) KEYWAY O-RING 2 plcs øA .675 (17.1) SPRING 1.170 (29.7) GROMMET ØE Ød .000 .120 (0.00 3.05) F FLAT .500 (12.7) MAX PANEL THICKNESS Accessory Thread 804-004-00 C THREAd b THREAd Integral Band Platform 804-003-00 DIMENSIoNS Shell Size Size 5 6 7 8 9 10 12 14 15 In. ØA mm. B Threads C Threads .2500-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .9375-20 UNEF-2A .9375-20 UNEF-2A In. ØD mm. In. ØE mm. F Flat In. mm. 11.94 13.46 16.84 16.84 18.29 20.02 24.64 25.91 27.76 .830 .885 .995 .995 1.075 1.140 1.340 1.390 1.450 21.08 .5000-32 UN-2A 22.48 .5625-32 UN-2A 25.27 .6875-28 UN-2A 25.27 .6875-28 UN-2A 27.31 .7500-28 UN-2A 28.95 .8125-28 UN-2A 34.04 1.0000-28 UN-2A 35.31 1.0625-20 UN-2A 36.83 1.1250-28 UN-2A .246 .286 .390 .442 .500 .564 .650 .805 .850 6.25 .625 7.26 .688 9.91 .812 11.23 .812 12.70 .875 14.33 .938 16.51 1.125 20.45 1.188 21.59 1.250 15.87 .470 17.47 .530 20.62 .663 20.62 .663 22.22 .720 23.82 .788 28.57 .970 30.18 1.020 31.75 1.093 ALTERNATE KEY PoSITIoNS JAM NUT PANEL CUToUT A Flat Shell Size Size øb A FLAT 5 6 7 8 9 10 12 14 15 In. In. mm. Pos. A° b° A° 150° 75° 95° 140° B° 210° 210° 230° 275° ± .002 ± 0.05 .480 .540 .674 .674 .730 .799 .980 1.030 1.013 In. ØB mm. 12.95 14.61 17.73 17.73 19.30 20.88 25.65 27.31 28.83 A b C d 12.19 .510 13.72 .575 17.12 .698 17.12 .698 18.54 .760 20.29 .822 24.89 1.010 26.16 1.075 25.73 1.135 © 2007 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Rev. 19-AUG-2008 G-8 Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Receptacles – In-Line REd STRIPE 1.160 (29.5) KEYWAY 1.160 (29.5) GROMMET .800 (20.3) ØA ØC MEdIUM RAISEd dIAMONd KNURL 2X .25 (6.4) Accessory Thread 804-004-01 .000 .120 (0.00 3.05) b THREAd MEdIUM MALE dIAMONd KNURL Integral Band Platform 804-003-01 DIMENSIoNS Shell Size Size 5 6 7 8 9 10 12 14 15 In. ØA mm. 11.43 13.21 14.73 15.32 17.65 18.67 22.35 25.65 26.92 ALTERNATE KEY PoSITIoNS In. ØC mm. 6.25 7.26 9.91 11.23 12.70 14.33 16.51 20.45 21.59 B Threads .2500-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .9375-20 UNEF-2A .9375-20 UNEF-2A .450 .520 .580 .603 .695 .735 .880 1.010 1.060 .246 .286 .390 .442 .500 .564 .650 .805 .850 Pos. A° b° `A° 150° 75° 95° 140° B° 210° 210° 230° 275° A b C d © 2007 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Rev. 19-AUG-2008 G-9 Series 804 A B C D E F G H J K L M