940LM08G55

Sav-Con® Connector Savers Sav-Con® Connector Savers MIL-DTL-26482 Series I & II 94 0 L 0 01 M 2 2 G 5 5 P X 1 31 Series No. Class 0 = General Duty 1 = Environmental 2 = Hi Rel L = Lock Ring (Optional) - = Standard Basic Part No. Finish Symbol (See Page G-6) Length Modification Code* (Omit for None) Alternate Position W, X, Y, Z (Omit for Normal) P = Pins, Plug Side S = Sockets, Plug Side Insert Arrangement G = EMI Ground Spring (Optional) - = Standard Shell Size EMI Ground Spring (Optional) Interfacial seal (Class 1 & 2) RECEPTACLE END A B PLUG END LOCK RING (Optional) *Add Modification Code 131 for Dry Lubricant on inside surfaces of Coupling Nut. May not be suitable for space applications. TABLE ONE Intermateable with the following connectors: MIL-C-83723 Series I; 40M39569; LN29504; PAN 6432-1; NFC C93-422 (HE301B); NFC C93-422 (HE302); NFC C93-422 (HE312); VG 95328 Shell Size 08 10 12 14 16 18 20 22 24 CAGE Code 06324 A Max .474 (12.0) .591 (15.0) .751 (19.1) .875 (22.2) 1.001 (25.4) 1.126 (28.6) 1.251 (31.8) 1.376 (35.0) 1.501 (38.1) B Max .750 (19.1) .859 (21.8) 1.031 (26.2) 1.156 (29.4) 1.281 (32.5) 1.391 (35.3) 1.531 (38.9) 1.656 (42.1) 1.777 (45.1) Length Max 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.500 (38.1) 1.500 (38.1) 1.500 (38.1) Printed in U.S.A. Metric Dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-8 Sav-Con® Connector Savers MIL-DTL-26482 Series I & II Insert Arrangements Shell Size Desig Insert Arrangement Dash No. 8-2 8-3 8-4 8-33 8-98 10-6 10-98 12-3 12-4 12-8 12-10 12-14 14-4 14-5 14-9 14-12 14-15 14-18 14-19 14-22 16-8 16-14 16-23 16-26 16-99 18-11 18-30 18-32 18-85 20-16 20-24 20-25 20-27 20-39 20-41 20-90 22-12 22-19 22-21 22-32 22-34 22-36 22-37 22-41 22-55 22-95 24-19 24-27 24-31 24-61 Contact Size: Quantity 12 16 20 2 3 4 3 3 6 6 3 4 8 10 14 4 5 5 8 14 18 19 1 8 22 26 21 29 32 5 24 25 27 37 41 3 4 4 1 Alternate Insert Positions Ao Y X 122 210 180 112 155 155 92 90 90 110 90 165 152 78 270 156 119 193 138 90 318 145 144 144 144 126 60 90 135 145 142 144 180 135 142 180 165 110 225 180 240 180 203 270 270 184 180 155 180 315 180 180 275 223 241 285 222 180 333 215 216 216 252 225 240 175 215 218 216 270 264 226 266 315 140 255 270 W 58 60 45 90 90 90 38 90 60 60 45 40 15 43 17 15 30 45 54 25 158 60 66 62 180 85 45 238 70 72 72 63 45 18 15 16 72 62 72 90 39 30 26 30 45 90 90 Z 270 292 295 295 273 240 234 270 331 240 338 340 340 350 265 240 347 290 288 288 333 270 349 288 298 288 314 225 324 C L A 8 10 12 14 4 8 6 1 2 11 1 8 16 16 FACE VIEW RECEPTACLE 18 20 2 12 12 19 21 22 32 34 36 31 27 55 26 11 6 14 6 19 16 31 In alternate positions, the pin insert rotates clockwise while the socket insert rotates counterclockwise the same number of degrees relative to the center line of the master key or keyway. 24 61 © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 w ww.glenair.com E-Mail: sales@glenair.com G-9 Sav-Con® Connector Savers