941-011NF22

Sav-Con® Connector Savers Sav-Con® Connector Savers MIL-DTL-5015 94 1 - 011 N F 2 8- 21 P X Series No. Class 1 = Environmental 2 = Hi Rel Basic Part No. Finish Symbol (See Page G-6) B D Thread Class 2A Alternate Position W,X,Y,Z (Omit for Normal) P = Pins, Plug Side S = Sockets, Plug Side Insert Arrangement Shell Size D Thread Class 2B Interfacial Seal RECEPTACLE END A C PLUG END TABLE I Shell Size 08S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44 48 A Ref .500 .625 .750 .750 .875 .875 1.000 1.000 1.125 1.250 1.375 1.500 1.750 2.000 2.250 2.500 2.750 3.000 (12.7) (15.9) (19.1) (19.1) (22.2) (22.2) (25.4) (25.4) (28.6) (31.8) (34.9) (38.1) (44.5) (50.8) (57.2) (63.5) (69.9) (76.2) B Max 1.750 1.750 1.750 2.125 1.750 2.125 1.750 2.125 2.125 2.125 2.125 2.125 2.125 2.125 2.125 2.125 2.125 2.125 (44.5) (44.5) (44.5) (54.0) (44.5) (54.0) (44.5) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) (54.0) C Max .844 (21.4) .969 (24.6) 1.062 (27.0) 1.062 (27.0) 1.156 (29.4) 1.156 (29.4) 1.250 (31.8) 1.250 (31.8) 1.344 (34.1 1.469 (37.3) 1.594 (40.5) 1.719 (43.7) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.219 (81.8) D Thread Class 2A 1/2–28 UNEF 5/8–24 UNEF 3/4–20 UNEF 3/4–20 UNEF 7/8–20 UNEF 7/8–20 UNEF 1 –20 UNEF 1 –20 UNEF 1 1/8–18 UNEF 1 1/4–18 UNEF 1 3/8–18 UNEF 1 1/2–18 UNEF 1 3/4–18 UNS 2 –18 UNEF 2 1/4–16 UNS 2 1/2–16 UN 2 3/4–16 UN 3 –16 UN Metric Dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-30 Sav-Con® Connector Savers MIL-DTL-5015 Insert Arrangements Shell Size 08S 10S 10SL 12S 14S Insert Arrangement Dash No. 8S-1 10S-2 10SL-3 10SL-4 12S-3 14S-2 14S-5 14S-6 14S-7 14S-9 16-7 16-9 16-10 16-11 16S-1 16S-4 16S-8 18-1 18-4 18-8 18-9 18-10 18-11 18-12 18-22 20-4 20-7 20-14 20-15 20-16 20-18 20-2 20-27 20-29 22-2 22-22 22-5 22-13 22-14 22-18 22-19 24-4 24-7 24-10 24-11 24-20 24-22 24-28 28-2 28-9 28-11 28-12 28-15 28-17 28-21 32-1 32-6 32-7 32-9 32-15 32-17 36-4 36-5 36-6 36-7 36-8 36-9 36-10 36-14 36-15 40-10 40-56 44-1 48-5 Contact Size: Quantity Service 16 12 8 4 0 Rating 1 1 3 2 2 4 5 6 3 2 2 2 A A A A A Inst. Inst. Inst. A A A A A A A D A Inst. D A Inst. A A A D D A A A A A D A A D A D A A A A D A A A D D Inst. D D A A A A A D A Inst. D D D A A A A A A A D A A A D A Alternate Keyway Positions (Degrees) W X Y 70 90 70 80 35 90 35 80 35 70 35 70 80 80 70 45 80 80 80 80 35 35 80 70 35 35 80 80 80 80 80 80 35 80 45 80 35 80 80 90 80 80 80 80 80 80 80 35 45 70 35 80 80 80 80 90 60 65 72 65 65 145 120 110 180 145 110 110 180 110 110 170 145 110 110 120 170 145 110 110 110 110 110 110 145 110 110 110 110 110 110 110 110 110 110 110 110 110 110 180 110 110 110 110 110 125 110 110 110 145 120 110 110 110 125 125 180 125 125 144 125 125 215 240 270 215 250 250 270 250 250 265 215 250 250 240 265 215 250 250 250 250 250 250 215 250 250 250 250 250 250 250 250 250 250 250 250 250 250 270 250 250 250 250 250 235 250 250 250 214 240 250 250 250 235 235 270 245 225 216 225 225 Z 290 290 280 325 325 280 325 290 325 290 280 280 290 280 280 280 280 325 325 280 290 325 325 280 280 280 280 280 280 325 280 280 325 280 280 280 280 280 280 280 280 280 280 290 325 280 280 280 280 305 310 288 310 310 INSERT KEYING POSITION 1 2 3 2 16 WX 16S 18 7 2 5 10 4 7 5 1 2 4 5 Y 6 3 4 8 3 7 2 3 2 Z PIN INSERT FACE VIEW NORMAL INSERT KEYING SHOWN 20 7 6 14 17 1 3 4 4 1 19 8 14 3 14 2 4 22 1 2 6 2 7 3 4 24 9 24 12 6 18 26 35 15 37 16 28 12 2 6 4 28 3 2 2 3 2 2 32 6 4 2 3 4 2 4 40 46 14 48 6 35 16 85 36 90 7 1 14 5 36 2 5 9 1 40 44 48 4 6 9 1 © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 w ww.glenair.com E-Mail: sales@glenair.com G-31 Sav-Con® Connector Savers