947-259ZW18-11SZ01

947-259 MIL-DTL-5015 Type Hermetic Panel Mount Bulkhead Feed-Thru MIL-DTL 5015 Type Basic Number Contact Type P = Pin on Jam-Nut Side, Socket Opposite S = Socket on Jam-Nut Side, Pin Opposite PP = Pin to Pin SS = Socket to Socket Shell Size 947-259 ZW 18 - 11 Insert Arrangement Per MIL-DTL-5015 P N 01 Panel Thickness Material and Finish Alternate Insert Arrangement W, X, Y, or Z (N for Normal) HERMETIC LEAK RATE MOD CODES Designator –585A –585B –585C Required Leak Rate 1 x 10-10 cc’s Helium per second 1 x 10-9 cc’s Helium per second 1 x 10-8 cc’s Helium per second B H HOLE F OR ł.0 20 MAX SAFETY W IRE, 3 EQ UALLY SPACED J M AX . 849 MAX SEE MI L-STD- 1651 F OR I NSERT ARRANGEMENTS F D C A THREA D - TYP . 125 . 29 G MAX PANEL © 2009 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 F-14 Panel Mount Bulkhead Feed-Thru F TABLE II E Dash No. 01 02 G Max .250 .500 H 1.224 1.474 J 2.36 2.62 Recommended Panel Cut Out TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS Shell Size 8S 10SL 12 12S 14 14S 16 16S 18 20 22 24 28 32 36 40 44 48 A Thread Class 2A 1/2-28 UNEF 5/8-24 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1-20 UNEF 1 1/8-18 UNEF 1 1/4-18 UNEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 3/4-18 UNEF 2-18 UNEF 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16 UN B Dia Max 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.500 (38.1) 1.500 (38.1) 1.650 (44.5) 1.875 (47.6) 2.000 (50.8) 2.188 (55.6) 2.438 (61.9) 2.688 (68.3) 2.938 (74.6) 3.188 (81.0) 3.438 (87.3) 3.688 (93.7) C Hex .688 (17.5) .812 (20.6) .938 (23.8) .938 (23.8) 1.062 (27.0) 1.062 (27.0) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) 3.000 (76.2) 3.250 (82.6) D Flats .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) 3.000 (76.2) 3.250 (82.6) 3.500 (88.9) E Dia ± .005 (0.1) .510 (13.0) .635 (16.1) .760 (19.3) .760 (19.3) .885 (22.5) .885 (22.5) 1.010 (25.7) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.510 (38.4) 1.760 (44.7) 2.010 (51.1) 2.260 (57.4) 2.510 (63.7) 2.760 (70.1) 3.010 (76.5) F Dim. Min. .219 (5.6) .281 (7.1) .344 (8.7) .344 (8.7) .406 (10.3) .406 (10.3) .469 (11.9) .469 (11.9) .531 (13.5) .594 (15.1) .656 (16.7) .719 (18.3) .844 (21.4) .969 (24.6) 1.089 (27.7) 1.219 (31.0) 1.344 (34.1) 1.469 (37.3) APPLICATION NOTES 1. 2. 3. 4. 5. To be identified with manufacturer’s name, part number and date code, space permitting. For pin/pin and socket/socket symmetrical layouts only, consult factory for available insert arrangements. Power to a given contact on one end will result in power to contact directly opposite regardless of identification letter. Hermeticity - Less than 1 x 10-7 cc/sec at one atmosphere. Electrical safety limits must be established by the user. Peak voltage, switching surge, transient voltage, etc. should be used 7. to determine the safety application. 6. Material/Finish*: Jam-nut, lock-ring, shell - stainless steel/O.D. cadmium over nickel Contacts - copper alloy/gold plated and alloy 52/gold plate Insulators - High-grade rigid dielectric/N.A. and full glass Interfacial seals and O-rings - silicone Metric Dimensions (mm) are indicated in parentheses. * Additional shell materials available, including titanium and Inconel®. Consult factory for ordering information. © 2009 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 F-15 MIL-DTL 5015 Type 947-259 MIL-DTL-5015 Type Hermetic F