GCB1000-U

Fiber Optic Tool Kits GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast® Cleaning Systems for Fiber Optic Connectors n Faster, More Effective and Less Costly than using Swabs or other Cleaning Methods n Excellent at Removing–Instead of Spreading–Debris and Oils around the Ferrule Surface n Complete Selection of Tips Available n Cost per Cleaning Cycle: One Cent! n Rugged Watertight Case n Optional Add-Ons for Advanced Optical Testing of MIL-PRF-29504 Termini with Quick Capture Analog Probe (6-4 pin Converter) and FiberChek Software for Quick Capture Capability on Your PC. Glenair’s CleanBlast® Systems Provide Rapid, Controlled Cleaning and Removal of Contamination from Fiber Optic End-Faces The CleanBlast® system creates a laminar flow of a highly filtered gas across the surface of the fiber. A solvent is then introduced and atomized to create a cleaning mist that leaves the fiber conrtamination free (MSDS data sheet is available), ensuring that your cable is serving at its optimal performance. Complete CleanBlast® Inspection System GCB1000-U Basic Part Number Includes: • Portable CleanBlast® with LCD Monitor and Inspection Probe in Ruggedized Case • 2.5 mm and 1.25 mm Patch Cord Inspection Tips • Universal 2.5 mm Bulkhead Cleaning Tip • Glenair Swabs Optional Quick Capture Analog Probe with 6 Pin to 4 Pin Converter (Omit for None) CleanBlast® Basic Kit GCB2000 Basic Part Number Includes: • Portable CleanBlast® • Glenair Swabs Laboratory Bench Model GCB3000-M Basic Part Number Includes: • Universal 2.5 mm Bulkhead Cleaning Tip • Glenair Swabs Optional Digital Mounting Monitor with Inspection Probe and 2.5 mm & 1.25 mm Patch Cord Inspection Tips Fiber check software can be downloaded from: http://www.westoverfiber.com © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com M-6 GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast® Cleaning Systems for Fiber Optic Connectors GCB1000 and GCB2000 SPECIFICATIONS Power Requirements Dimensions Weight Air Source Cleaning Cycle Time Certification 110 VAC-220 VAC, 2 amp 16”L x 13”W x 7”D 21 lb 40 psi Internal Compressor 5 seconds CE Approved GCB3000 SPECIFICATIONS Power Requirements Dimensions Weight Air Source 110 VAC-220 VAC, 2 amp 8”L x 9”W x 7”D 12 lb External, compressed air or nitrogen; regulated between 60 – 250 psi .8 seconds CE Approved Cleaning Cycle Time Certification Fiber Chek Software Fiber Optic Analysis Program Fiber Chek is an integrated hardware/software package engineered with the single purpose of critically and consistently grading fiber end-faces. Works hand in hand with the Quick Capture Analog Probe for visual inspection, taking pictures and testing fibers on your PC. • Automatic debris and defect detection, including fine scratches • Measures epoxy ring for out-of-tolerance conditions • Inspection results, including image data, can be printed or archived • Utilizes industry standards or user defined threshold settings © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com M-7 Fiber Optic Tool Kits