IPT01A18-11SZCPHM11

with PHM Backshell and Sleeves to Accommodate Various Cable Sizes IPT 01 A 18-11 S Z C PHM11 XX MIL-C-26482 Series l Type 01 - In-Line Receptacle Connector Class A - Non-Environmental Shell Size and Insert Arrangements Contact Gender P - Pin S - Socket Mod Code Options See Table II PHM Thread Size See Table I Contact Type C - Crimp (Omit for Solder Cup) Alternate Insert Rotation (W, X, Y, Z) Omit for Normal IPT 01 A...PHM_ _ In-Line Receptacle Connector IPT Series Bayonet Lock Connectors 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. B C G APPLICATION NOTES 1. In-line receptacle with a PHM backshell that assures an excellent mechanical and waterproof seal to IP65 when used with correct neoprene sealing bushing. Rubber sleeves included to allow use of different diameter cables. 2. Connector Class “A” (non-environmental)—no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com B-44 with PHM Backshell and Sleeves to Accommodate Various Cable Sizes TABLE I: DIMENSIONS Shell size 8 10 12 14 16 18 20 22 24 P.N. PHM 11 11 11 11 11 11 / 18 18 18 18 / 22 / 24 B min. - max. 2-7 2-9 2 - 11 2 - 11 2 - 11 2 - 11 / 9 - 16.5 9 - 16.5 9 - 16.5 9 - 16.5 / 15 - 20 / 19 - 24 C Max. 15 21 24 24 24 42 42 42 42 G ±0.1 17.3 21.8 25.1 28.6 30.6 33.2 36.5 39.6 43.1 L Max. 47 49 58 58 58 75 75 75 75 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) F2 - Bright Nickel Plating (RoHs) F6 - Black Electrodeposited Paint (RoHs) F7 - Black Zn-Co Plating (RoHs) F8 - Olive Drab Zn-Co Plating Assembly with Accessories (Omit for Standard Version) Key Polarization (Omit for N version) W, X, Y, Z = Alternates N0 - Connector Less Backshell GXXX - Custom Designed Connector STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance -40°C + 100°C 24 hour Very Good Very Good -55°C + 125°C 500 hour NO Very Good -55°C + 125°C 500 hour Very Good Good -55°C + 125°C 500 hour Very Good Very Good -40°C + 100°C 200 hour Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com B-45 IPT Series Bayonet Lock Connectors IPT 01 A...PHM_ _ In-Line Receptacle Connector