IPT02SE18-11SZ

IPT SE Series Bayonet Lock Connectors IPT 02 SE Rear Box Mount Square Flange Receptacle IPT 02 SE 18-11 S Z XX MIL-C-26482 Series l Type 02 - Rear Box Mount Square Flange Receptacle Connector Class SE - Crimp Contact/Environmental Shell Size and Insert Arrangements Mod Code Options See Table II Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Contact Gender P - Pin S - Socket L2 L3 D2 E D1 10.3 Max. L1 B APPLICATION NOTES 1. Box mount receptacle with through mounting holes; no rear accessory threads. 2. Connector Class “SE” (crimp contact/environmental)––Wire sealing grommet and insert seal supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com A-16 IPT 02 SE Rear Box Mount Square Flange Receptacle TABLE I: DIMENSIONS Shell size 8 10 12 14 16 18 20 22 24 B Max. 21.03 24.23 26.59 28.98 31.34 33.73 36.90 40.08 43.25 D1 + 0.8 - 0.6 11.2 14.3 17.5 20.7 23.9 27.0 30.2 33.4 36.6 D2 Min. 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 3.6 E ± 0.15 15.08 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 L1 Max. 33.5 33.5 33.5 33.5 33.5 33.5 34.7 36.0 36.0 L2 + 0.8 -0 10.94 10.94 10.94 10.94 10.94 10.94 14.12 14.12 14.96 L3 Max. 2.0 2.0 2.0 2.0 2.0 2.0 2.8 2.8 2.8 Maximum Weight in Grams 6 7 10 12 14 17 21 25 27 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) F2 - Bright Nickel Plating (RoHs) F6 - Black Electrodeposited Paint (RoHs) F7 - Black Zn-Co Plating (RoHs) F8 - Olive Drab Zn-Co Plating Assembly with Accessories (Omit for Standard Version) Key Polarization (Omit for N version) B, C, E, F = Alternates N0 - Connector Less Backshell GXXX - Custom Designed Connector STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance -40°C + 100°C 24 hour Very Good Very Good -55°C + 125°C 500 hour NO Very Good -55°C + 125°C 500 hour Very Good Good -55°C + 125°C 500 hour Very Good Very Good -40°C + 100°C 200 hour Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com A-17 IPT SE Series Bayonet Lock Connectors