IPTG06A18-11SZCPH16

IPT Series Bayonet Lock Connectors with Backshell and PG Cable Gland IPT G 06 A 18-11 S Z C PH16 XX MIL-C-26482 Series l Type Grounding Fingers (Omit for Standard) 06 - Straight Plug Connector Class A - Non-Environmental Shell Size and Insert Arrangements Mod Code Options See Table II PG Thread Size See Table I Contact Type C - Crimp (Omit for Solder Cup) Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Contact Gender P - Pin S - Socket IPT 06 A...PH_ _ Straight Plug Connector B G APPLICATION NOTES 1. Straight plug with backshell and plastic PG cable gland. Other PG sizes and types available upon request. 2. Connector Class “A” (non-environmental)––no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com B-74 with Backshell and PG Cable Gland TABLE I: DIMENSIONS Shell size 8 10 12 14 16 18 20 22 24 A Max 40 40 40 45 45 45 52 60 60 B min. - max. 3 - 6.5 / 4 - 8 4-8 5 - 10 5 - 10 / 6 - 12 / 9 - 14 5 - 10 / 6 - 12 / 9 - 14 6 - 12 / 9 - 14 6 - 12 / 9 - 14 6 - 12 / 9 - 14 / 13 - 18 6 - 12 / 9 - 14 / 13 - 18 PG thread 7/9 9 11 11 / 13.5 / 16 11 / 13.5 / 16 13.5 / 16 13.5 / 16 13.5 / 16 / 21 13 5 / 16 / 21 L Max. 65 65 65 75 75 75 82 95 95 G Max 19.05 21.80 26.20 29.40 32.55 35.35 38.90 42.10 45.10 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) F2 - Bright Nickel Plating (RoHs) F6 - Black Electrodeposited Paint (RoHs) F7 - Black Zn-Co Plating (RoHs) F8 - Olive Drab Zn-Co Plating Assembly with Accessories (Omit for Standard Version) Key Polarization (Omit for N version) W, X, Y, Z = Alternates N0 - Connector Less Backshell GXXX - Custom Designed Connector STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance -40°C + 100°C 24 hour Very Good Very Good -55°C + 125°C 500 hour NO Very Good -55°C + 125°C 500 hour Very Good Good Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with Drab Passivation Olive Drab Passivation -55°C + 125°C 500 hour Very Good Very Good -40°C + 100°C 200 hour Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com B-75 IPT Series Bayonet Lock Connectors IPT 06 A...PH_ _ Straight Plug Connector