M24758-13-16-08

Conduit & Accessories M24758/13 Adapter for Connectors with AS85049 Fig 4 Accessory Interface M24758/13- 16- 08- 01- A Basic Part No. Conduit Size Code (See Table I) Connector Dash Number (See Table II) AS85049 Fig 4 Material Designator: A = Aluminum B = Brass C = CRES 316 Style Designator J .12 (3.0) Min .06 (1.5) Min L Y M Thread (Ref) A Dia E Dia (Ref) K Dia C Thread Nut Coupling Holes for .032 Dia Safety Wire (3 Req'd) Body Straight Knurl (Medium Coarse) (3 Places) Straight Knurl (Medium Coarse) STYLE 02 SAME AS STYLE 01 EXCEPT Y DIMENSION IS LESS THAN J. STYLE 02 IS USED WHEN THE EXTRA WORKING ROOM PROVIDED BY DIMENSION J OF STYLE 01 IS NOT A REQUIREMENT. STYLE 01 FOR USE WHEN E DIAMETER IS GREATER THAN K DIAMETER AS85049 Fig 4 Design Standard Applies M Thread (Ref) .38 (9.7) ±.03 (.8) .25 (6.4) A Dia E Dia (Ref) K Dia N Dia Nut Coupling Holes for .032 Dia Safety Wire (3 Req'd) .25 (6.4) C Thread Straight Knurl (Medium Coarse) (2 Places) STYLE 03 FOR USE WHEN E DIAMETER IS EQUAL TO OR LESS THAN K DIAMETER © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 71-20 www.glenair.com E-Mail: sales@glenair.com M24758/13 Adapter for Connectors with AS85049 Fig 4 Accessory Interface TABLE I Conduit Size Code 02 03 04 05 06 08 10 12 16 20 24 C Thread (Class 2A) 0.438 - 28 UNEF 0.563 - 24 UNEF 0.688 - 24 UNEF 0.813 - 20 UNEF 0.938 - 20 UNEF 1.250 - 18 UNEF 1.563 - 18 UNEF 1.875 - 16 UN 2.375 - 16 UN 2.875 - 16 UN 3.375 - 16 UN L ±.02 .210 .250 .250 .310 .310 .370 .370 .430 .430 .430 .430 (.5) (5.3) (6.4) (6.4) (7.9) (7.9) (9.4) (9.4) (10.9) (10.9) (10.9) (10.9) K Dia Min. .250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1) TABLE II (Connector Dash Numbers & Fitting Dimensions) Conn. Dash No. 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 NAS 1599 & MIL-DTL83723 (Series 1 & 3) 08 10 12 14 16 18 20 22 24 MIL-DTL5015 (MS3400 Series) 8SL 10S, 10SL 12, 12S 14, 14S 16, 16S 18 20 22 24 28 32 36 40 44 48 MIL-DTL81703 (Navy) (Series 3) 03 07 12 19 27 37 MIL-DTL26482 (Series 2) 08 10 12 13 16 18 20 22 24 A Dia. Max. .669 (17.0) .617 (15.7) .734 (18.6) .858 (21.8) .984 (25.0) 1.112 (28.2) 1.218 (30.9) 1.345 (34.2) 1.468 (37.3) 1.593 (40.5) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.219 (81.8) 1.653 (42.0) M Thread (Class 2B) (Ref.) (Note 3) 0.563 - 24 UNEF 0.500 - 20 UNF 0.625 - 24 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.312 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNEF 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF E Dia. (Ref) Note 3 .270 (6.9) .270 (6.9) .375 (9.5) .511 (13.0) .585 (14.9) .710 (18.0) .789 (20.0) .914 (23.2) 1.039 (26.4) 1.154 (29.3) 1.389 (35.3) 1.635 (41.5) 1.850 (47.0) 2.065 (52.5) 2.320 (58.9) 2.570 (65.3) 1.194 (30.3) J Y (Style 01) (Style 02) ±.03 (.8) ±.03 (.8) 1.060 (26.9) .620 (15.7) 1.060 (26.9) .620 (15.7) 1.060 (26.9) .690 (17.5) 1.060 (26.9) .690 (17.5) 1.060 (26.9) .750 (19.1) 1.060 (26.9) .750 (19.1) 1.120 (28.4) .750 (19.1) 1.380 (35.1) .810 (20.6) 1.830 (46.5) .810 (20.6) 1.830 (46.5) .810 (20.6) 2.300 (58.4) .880 (22.4) 2.550 (64.8) .880 (22.4) 2.800 (71.1) .880 (22.4) 3.050 (77.5) .940 (23.9) 3.550 (90.2) .940 (23.9) 3.620 (91.9) .940 (23.9) 1.880 (47.8) .810 (20.6) 61 1. The M24758/13 adapter couples connectors listed in Table I to M24758/2, M24758/3 or M24758/4 conduit fittings. 2. The coupling nut end of this adapter shall conform to Military Standard MS3155 (Navy), "Connector, electric, rear accessory design standard". AS85049 Fig 4 takes precedence over this specification. 3. The E diameter and M-thread of this drawing are the same as the E diameter and M-thread of MS3155, and are included for reference purposes. 4. Metric dimensions (mm) are indicated in parentheses. 5. For complete dimensions see applicable Military Specification. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 71-21 www.glenair.com E-Mail: sales@glenair.com Conduit & Accessories