M85049-2125A03

NonEnvironmental Backshells AS85049/21 Non-Environmental Strain Relief Backshells M85049/21 11 A 0 2 A Basic Part No. Shell Size Clamp Size Finish A = Black Anodize Length Code (Omit for Standard) Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 A Thread Length 1.312 (33.3) Max C Cable Range E TABLE I Clamp Size Shell (Table IV) Max Size Min 02 01 9 03 01 11 04 02 13 05 02 15 06 02 17 07 03 19 08 03 21 09 03 23 10 04 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H C Dia Max .75 (19.1) .85 (21.6) 1.00 (25.4) 1.10 (27.9) 1.25 (31.8) 1.40 (35.6) 1.50 (38.1) 1.65 (41.9) 1.75 (44.5) TABLE II Clamp Cable Range Size Min Max 01 .062 (1.6) .125 (3.2) 02 .125 (3.2) .250 (6.4) 03 .250 (6.4) .375 (9.5) 04 .312 (7.9) .500 (12.7) 05 .437 (11.1) .625 (15.9) 06 .562 (14.3) .750 (19.1) 07 .687 (17.4) .875 (22.2) 08 .812 (20.6) 1.000 (25.4) 09 .937 (23.8) 1.125 (28.6) 10 1.062 (27.0) 1.250 (31.8) E Max .80 (20.3) 1.00 (25.4) 1.10 (27.9) 1.20 (30.5) 1.25 (31.8) 1.40 (35.6) 1.50 (38.1) 1.65 (41.9) 1.75 (44.5) 1.90 (48.3) TABLE III 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Length Code Std. A B C Available Shell Sizes 09 - 25 09 - 25 15 - 25 21 - 25 Length 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 36-4