M85049-42-4DS

Strain Reliefs AS85049/42 and MS3057D Strain Reliefs M85049/42- 10D W Basic Part No. Dash No. Material and Finish N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivate W = Aluminum, 1,000 Hour Cadmium Olive Drab Over Electroless Nickel MS3057- 10D A Basic Part No. Dash No. MIL-DTL-5015 MS ”V” Thread (Mates to General Duty ‘A’ Endbell) SUPERCEDED SPECIFICATION Material and Finish A = Aluminum, Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab N = Aluminum, Electroless Nickel D = 300 Series Steel, Cadmium Plate Black S = 300 Series Steel, Passivate G E Thread F Cable Entry Stainless Steel Clamp Saddle Configuration H Telescoping Screws TABLE I E Thread Dash Class 2B No. 5/8 - 24 UNEF 4D 3/4 - 20 UNEF 6D 7/8 - 20 UNEF 8D 1 - 20 UNEF 10D 12D 1 3/16 - 18 UNEF 16D 1 7/16 - 18 UNEF 1 3/4 - 18 UNS 20D 2 - 18 UNS 24D 2 1/4 - 16 UN 28D 2 1/2 - 16 UN 32D F Dia Max .937 (23.8) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.437 (36.5) 1.688 (42.9) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) G Dia ±.020 (.5) 1.281 (32.5) 1.281 (32.5) 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) 1.406 (35.7) 1.563 (39.7) 1.625 (41.3) 1.900 (48.3) 1.900 (48.3) H ±.020 .937 1.125 1.312 1.312 1.531 1.750 2.093 2.343 2.750 3.000 (.5) (23.8) (28.6) (33.3) (33.3) (38.9) (44.5) (53.2) (59.5) (69.9) (76.2) Cable Entry Max .312 (7.9) .437 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .937 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-14