M85049-45-W22

Strain Reliefs AS85049/45 Strain Relief Glenair Connector Designator F Basic Part No. MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309 M85049/45 W 1 0 Dash No. Nut Finish A = Black Anodize W = 1,000 Hour Cadmium Olive Drab Over Electroless Nickel A Thread F E Cable Entry C Thermoplastic Body Aluminum Nut TABLE I Dash Shell Size A Thread No. Ref. Class 2B 8 8/9 .438 - 28 UNEF 10 10/11 .562 - 24 UNEF 12 12/13 .688 - 24 UNEF 14 14/15 .813 - 20 UNEF 16 16/17 .938 - 20 UNEF 18 18/19 1.063 - 18 UNEF 20 20/21 1.188 - 18 UNEF 22 22/23 1.313 - 18 UNEF 24 24/25 1.438 - 18 UNEF C Dia Max .578 (14.7) .703 (17.9) .828 (21.0) .953 (24.2) 1.078 (27.4) 1.203 (30.6) 1.328 (33.7) 1.453 (36.9) 1.578 (40.1) E Max 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.422 (36.1) 1.422 (36.1) 1.422 (36.1) F Max .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .344 (8.7) Cable Entry Max Min .203 (5.2) .094 (2.4) .250 (6.4) .141 (3.6) .323 (8.2) .172 (4.4) .422 (10.7) .203 (5.2) .500 (12.7) .234 (5.9) .562 (14.3) .265 (6.7) .625 (15.9) .297 (7.5) .703 (17.9) .328 (8.3) .765 (19.4) .359 (9.1) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-16