M85049-91-17M

AS85049/91 and M85049/92 Composite Strain Reliefs Self-Locking Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 M85049/91- 11 T Basic Part No. M85049/91 = Straight M85049/92 = 90° Shell Size Material and Finish Designator (Note 4) J = Composite (Conductive), Cadmium Olive Drab Over Electroless Nickel M = Composite (Conductive), Electroless Nickel T = Composite (Non-Conductive) Without Plating Strain Reliefs A Thread Typ. F J C Dia Typ. H Typ. G Typ. (See Note 3) K TABLE I Shell Size 09 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H C Dia Max .858 (21.8) .984 (25.0) 1.157 (29.4) 1.280 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.890 (48.0) F Max .840 (21.3) .960 (24.4) 1.100 (27.9) 1.100 (27.9) 1.230 (31.2) 1.410 (35.8) 1.510 (38.4) 1.660 (42.2) 1.760 (44.7) G Max .98 (24.9) 1.05 (26.7) 1.20 (30.5) 1.30 (33.0) 1.42 (36.1) 1.52 (38.6) 1.64 (41.7) 1.77 (45.0) 1.89 (48.0) H +.031 Dia .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .700 (17.8) .850 (21.6) J Max 1.06 (26.9) 1.10 (27.9) 1.18 (30.0) 1.30 (33.0) 1.38 (35.1) 1.45 (36.8) 1.54 (39.1) 1.62 (41.1) 1.69 (42.9) K ±.062 .875 .937 1.031 1.125 1.312 1.375 1.500 1.625 1.750 (1.6) (22.2) (23.8) (26.2) (28.6) (33.3) (34.9) (38.1) (41.3) (44.5) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Clamp Entry is measured with Saddle bars closed and seated on Clamp Ears. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-24