M85528/2-14A01

Miscellaneous Accessories M85528/2 Mounting Flange, 3/4 Perimeter Basic Part Number INACTIVE A = Primer Coat Required Shell Size and Class M85528/2 - 8A 01 For New Design Use AS85049/95 on page 68-20 A B A D Numerical Designation indicates Corrosion-Resistant Nuts are required. Omit for Alloy Steel Nuts C E APPLICATION NOTES 1. 2. 3. Assembly identified with manufacturer’s name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. .040 (1.0) ±.003 (.1) AB Nut, Self-Locking, Clinch NASM 45938 Type, 4 Places TABLE I: Reference for Connector Shell Size Shell Size & Class Thread UNJC-3B 3A 7A 8A 10A 10B 12A 12B 14A 14B 16A 16B 18A 18B 19A 20A 20B 22A 22B 24A 24B 25A 27A 28A 32A 36A 37A 61A 4-40 4-40 4-40 4-40 6-32 4-40 6-32 4-40 6-32 4-40 6-32 4-40 6-32 4-40 4-40 6-32 4-40 6-32 6-32 6-32 6-32 4-40 6-32 6-32 6-32 4-40 4-40 © 2012 Glenair, Inc. A ±.003 (0.1) .625 .719 .594 .719 .812 .812 .938 .906 1.031 .969 1.125 1.062 1.203 .906 1.156 1.297 1.250 1.375 1.500 1.375 1.500 .969 1.562 1.750 1.938 1.187 1.437 (15.9) (18.3) (15.1) (18.3) (20.6) (20.6) (23.8) (23.0) (26.2) (24.6) (28.6) (27.0) (30.6) (23.0) (29.4) (32.9) (31.8) (34.9) (38.1) (34.9) (38.1) (24.6) (39.7) (44.5) (49.2) (30.1) (36.5) B ±.015 (0.4) .925 1.019 .880 1.019 1.312 1.104 1.312 1.198 1.406 1.280 1.500 1.406 1.578 1.192 1.535 1.688 1.665 1.738 1.891 1.785 1.891 1.255 2.000 2.312 2.500 1.500 1.812 (23.5) (25.9) (22.4) (25.9) (33.3) (28.0) (33.3) (30.4) (35.7) (32.5) (38.1) (35.7) (40.1) (30.3) (39.0) (42.9) (42.3) (44.1) (48.0) (45.3) (48.0) (31.9) (50.8) (58.7) (63.5) (38.1) (46.0) C ±.015 (0.4) .641 .688 .570 .720 .749 .855 .938 .984 1.031 1.094 1.125 1.220 1.234 .953 1.345 1.359 1.478 1.483 1.560 1.595 1.658 1.094 1.820 2.062 2.312 1.281 1.594 CAGE Codes 06324 (16.3) (17.5) (14.5) (18.3) (19.0) (21.7) (23.8) (25.0) (26.2) (27.8) (28.6) (31.0) (31.3) (24.2) (34.2) (34.5) (37.5) (37.7) (39.6) (40.5) (42.1) (27.8) (46.2) (52.4) (58.7) (32.5) (40.5) D Max .166 .166 .166 .166 .183 .166 .183 .166 .183 .166 .183 .166 .183 .166 .166 .183 .166 .183 .183 .183 .183 .166 .183 .183 .183 .166 .166 (4.2) (4.2) (4.2) (4.2) (4.6) (4.2) (4.6) (4.2) (4.6) (4.2) (4.6) (4.2) (4.6) (4.2) (4.2) (4.6) (4.2) (4.6) (4.6) (4.6) (4.6) (4.2) (4.6) (4.6) (4.6) (4.2) (4.2) E ±.030 (0.8) .325 .433 .308 .433 .433 .530 .530 .624 .624 .687 .687 .780 .780 .620 .874 .865 .968 .907 1.000 1.031 1.125 .683 1.125 1.188 1.375 .874 1.602 (8.3) (11.0) (7.8) (11.0) (11.0) (13.5) (13.5) (15.8) (15.8) (17.4) (17.4) (19.8) (19.8) (15.7) (22.2) (22.0) (24.6) (23.0) (25.4) (26.2) (28.6) (17.3) (28.6) (30.2) (34.9) (22.2) (40.7) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com 68-25 www.glenair.com 68