MS2504348DA

Protective Covers MS25042 and MS25043 Protective Covers MS25042- 20D A MIL-DTL-5015 Basic Part No. MS25042 = Plug Cover MS25043 = Receptacle Cover Finish A = Black Anodize Shell Size MS25042- 20D Basic Part No. MS25042 = Plug Cover MS25043 = Receptacle Cover G E Thread Attachment L Dia F K E Thread H K Prior Revision Available Shell Size Finish is Cadmium Olive Drab J Gasket Attachment M Dia MS25042 Plug Cover TABLE I Shell Size 8D 10D 12D 14D 16D 18D 20D 22D 24D 28D 32D 36D 40D 44D 48D E Thread 1/2 - 28 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 3/8 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN 2 3/4 - 16 UN 3 - 16 UN F Dia Max .562 (14.3) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.312 (33.3) 1.437 (36.5) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.312 (58.7) 2.562 (65.1) 2.812 (71.4) 3.062 (77.8) G Max .656 (16.7) .656 (16.7) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) H Max .688 (17.5) .815 (20.7) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.344 (34.1) 1.469 (37.3) 1.594 (40.5) 1.719 (43.7) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.188 (81.0) MS25043 Receptacle Cover J Max .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) K Attachment Length 4.00 (101.6) 4.00 (101.6) 4.50 (114.3) 4.50 (114.3) 4.50 (114.3) 4.50 (114.3) 5.00 (127.0) 5.00 (127.0) 5.50 (139.7) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) L Dia Min .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) M Dia Min .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .166 (4.2) .166 (4.2) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 66-4 66 O Protective Covers.p65 4 1/3/2006, 12:49 PM