MS27558-8

MS27558 Strain Relief Glenair Connector Designator E MIL-DTLC-26500 MS27558- 4 Basic Part No. Dash No. E A Thread Set Screw Wire Holes (3 Equally Spaced) C F H G TABLE I Dash Shell Size A Thread No. Ref. Class 2B 1* .437 - 28 UNEF 8 2 10 .562 - 24 UNEF 3 .750 - 20 UNEF 12 4 .812 - 20 UNEF 14 5 16 .938 - 20 UNEF 6 1.062 - 18 UNEF 18 7 20 1.188 - 18 UNEF 8 1.312 - 18 UNEF 22 9 1.438 - 18 UNEF 24 * Consult Factory C Max .672 (17.1) .797 (20.2) 1.016 (25.8) 1.110 (28.2) 1.234 (31.3) 1.360 (34.5) 1.485 (37.7) 1.610 (40.9) 1.735 (44.1) F E Max Max 1.200 (30.5) .602 (15.3) 1.320 (33.5) .650 (16.5) 1.320 (33.5) .740 (18.8) 1.487 (37.8) .775 (19.7) 1.470 (37.3) .830 (21.1) 1.588 (40.3) .897 (22.8) 1.759 (44.7) .955 (24.3) 1.759 (44.7) 1.015 (25.8) 2.027 (51.5) 1.077 (27.4) G H Max Dia .892 (22.7) .240 (6.1) 1.072 (27.2) .365 (9.3) 1.072 (27.2) .365 (9.3) 1.108 (28.1) .515 (13.1) 1.108 (28.1) .515 (13.1) 1.233 (31.3) .640 (16.3) 1.477 (37.5) .775 (19.7) 1.477 (37.5) .775 (19.7) 1.727 (43.9) 1.060 (26.9) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Finish: Anodize. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-3 Strain Reliefs