MWDM6L-GS-8J

Micro-D Harness Micro-D Metal shell MWDM Back-to-Back unshielded Cable Assemblies Save Time and Money With Back-To-Back Cables– These Micro-D connectors feature crimp wire terminations and epoxy encapsulation. The installed cost is lower than terminating solder cup connectors. 100% Certified– all back-to-back assemblies are 100% checked for continuity, resistance, voltage and insulation resistance. Hardware Note – if jackposts are required on one end and jackscrews on the other, use hardware designator “B” (no hardware installed), and order hardware kits separately. A B HoW to oRDER BACk-to-BACk uNsHIELDED CABLEs shell Material Insulator Contact and Finish Material Layout 9 15 21 25 31 37 51 51-2 67 69 100 Connect or type GP – Pin (Plug) Wire Gage (AWG) 4 6 8 0 – – – – #24 #26 #28 #30 series Wire type k – M22759/11 Wire Color 1 – White 2 – Yellow 7 – Ten Color total Length Inches Hardware 18 Total Length In Inches. “18” Specifies 18 Inches (2” Min.) MWDM Aluminum shell L – LCP 1 – Cadmium 30% GlassFilled Liquid 2 – Nickel Crystal 4 – Black Anodize Polymer 5 – Gold 6 – Chem Film stainless steel shell Connector Both Ends 600 Vrms Teflon (TFE) Gs – Socket Cs (Receptacle) Connector Both Ends – Pin Connector to Socket Connector J – M22759/33 Repeating Stripes Per MIL-STD-681 600 Vrms Modified CrossLinked Tefzel® (ETFE) 600 VrmsType E M16878/4 (TFE) (replaced by M22759/11 for mil spec applications) 5 – Color-Coded E – NEMA HP3-EB 3 – Passivated (Striped wire not available on 67, 69 or 100 pin connectors or for #28, #30 AWG) B P M M1 s s1 L k Sample Part Number MWDM 1 L– 25 GP – 6 k 7– 18 B MICRo-D MouNtING HARDWARE B P M M1 s s1 L k Order Hardware Separately thru-Hole Removable Includes Nut and Washer Jackpost Jackscrew Hex Head Removable E-ring Jackscrew Hex Head Removable E-ring Extended Jackscrew Slot Head Removable E-ring Jackscrew Slot Head Removable E-ring Extended Hex Head Non- Removable Jackscrew Jackscrew Slot Head NonRemovable Extended © 2006 Glenair, Inc. Rev. 8-06 www.glenair.com CAGE Code 06324/0CA77 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 B-6 Micro-D Metal Shell MWDM Back-To-Back Unshielded Cable Assemblies PERFORMANCE SPECIFICATIONS Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 μ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) Connector Shell MATERIALS AND FINISHES Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215 Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant B A B C E D 9-69 CONTACTS .096/.088 (2.43/2.23) DIA. 100 CONTACTS .150/.145 (3.81/3.68) DIA. G F WIRE LENGTH +1.0/-0.0 (+25.4/-0.0) .093 ± .005 (2.36 ± 0.13) H J DIMENSIONS A Max. In . Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 100P 100S In. .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.170 2.170 B mm. ± 0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48 38.48 45.72 45.72 ± .003 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.800 1.800 C Max. In. .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.383 1.451 D Max. In. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .184 .250 .184 .250 .224 .293 .270 .333 E Max. In. In. .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351 .351 .394 .394 F mm. ± 0.08 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 ± .003 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 G Max. In. .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 H Max. In. .400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.442 1.442 J Max. In. .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310 .310 .360 .360 mm. 19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07 44.07 55.12 55.12 mm. 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61 34.29 35.13 36.86 mm. 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 4.67 6.35 4.67 6.35 5.69 7.44 6.86 8.46 mm. 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01 mm. 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 mm. 10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29 34.29 36.63 36.63 mm. 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 9.14 9.14 © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-7 E-Mail: sales@glenair.com