G9105TH1TF

Global Mixed-mode Technology Inc. G9105 5V 1A Low Dropout Regulator with Enable Features Dropout voltage 0.5V @ IO = 1A Output current in excess of 1A Output voltage accuracy ±2.5% Quiescent current, typically 5mA Internal short circuit current limit Internal over temperature protection ON/OFF control General Description The G9105 positive 5V voltage regulator features the ability to source 1A of output current. The dropout voltage is 0.5V at 1A output current. The typical quiescent current is 5mA. Furthermore, the quiescent current is smaller when the regulator is in the dropout mode (VIN < 5.5V). Familiar regulator features such as over temperature and over current protection circuits are provided to prevent it from being damaged by abnormal operating conditions. A VEN pin is provided to disable the output when needed. Ordering Information ORDER NUMBER G9105TF1T G9105TH1T --- ORDER NUMBER (Pb free) G9105TF1Tf G9105TH1Tf G9105P11U MARKING G9105 G9105 G9105 P1: SOP-8 TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C PACKAGE TO-220F-4 TO-220F-4 SOP-8 Note: TF :TO220F-4 (short lead) TH :TO220F-4 (long lead) 1: Bonding Code T: Tube U: Tape & Reel Package Type Typical Application G9105 TO-220F-4 G9105 VIN GND 1 2 3 4 8 7 6 5 VO GND GND NC VEN IO VIN C1 4.7µF G9105 IQ VOUT COUT 47µF Top View GND VEN 12 3 4 VIN VO GND VEN SOP-8 Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. Absolute Maximum Ratings (Note 1) Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V VEN Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V Power Dissipation Internally Limited (Note 2) Maximum Junction Temperature . . . . . . . . . . . . . . 150°C Storage Temperature Range. . . . .-65°C ≤ TJ ≤+150°C Reflow Temperature (soldering, 10 sec) . . . . . . 260°C Continuous Power Dissipation (TA = +25°C) TO-220F-4 No Heatsink . . . . . . . . . . . . . . . . .80°C/W TO-220F-4 with Infinite Heatsink . . . . . . . . . . 36°C/W Thermal Resistance Junction to Ambient, (θJA) SOP-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180°C/W Electrical Characteristics Operating Conditions G9105 (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V~7V Temperature Range. . . . . . . . . . . . . . -20°C ≤ TA ≤85°C VEN Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . .VIN+0.3V VIN =7V, IO = 0.5A, CIN = 4.7µF, COUT =47µF, TA = TJ = 25°C unless otherwise specified [Note 3] PARAMETER Output Voltage Line Regulation Load Regulation Quiescent Current Ripple Rejection Dropout Voltage Short Circuit Current Over Temperature VEN Voltage High VEN Voltage Low VEN Bias Current High VEN Bias Current Low VENH VENL IENH IENL Output Active Output Disabled VEN = 2.7V VEN = 0.4V VD IQ SYMBOL VO IO = 0.5A CONDITION 5.5V < VIN < 7V, IO = 10mA 50mA < IO < 1A VIN = 5.5V, VEN = VIN VIN = 5.5V, VEN = 0V fi = 120Hz, 1VP-P, IO = 100mA IO = 1A MIN 4.875 ----------------2 ------- TYP 5 0.5 0.5 5 10 35 --1.9 150 --------- MAX 5.125 2 2 10 30 --0.5 ------0.8 20 20 UNIT V % % mA µA dB V A °C V V µA µA Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. Note2: The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, θJA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and IC will go into thermal shutdown. For the TO-220F-4 package, θJA is 80°C/W (No heat sink). Note3: Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note4: The type of output capacitor should be tantalum or aluminum. Definitions Dropout Voltage The input/output Voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 2% below its nominal value, dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Line Regulation The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Load Regulation The change in output voltage for a change in load current at constant chip temperature. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Maximum Power Dissipation The maximum total device dissipation for which the regulator will operate within specifications. Quiescent Bias Current Current which is used to operate the regulator chip and is not delivered to the load. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.9 Preliminary Jul 07, 2006 2 Global Mixed-mode Technology Inc. Block Diagram G9105 VIN 1 THERMAL SHUTDOWN SHORT-CIRCUIT SHORT-CIRCUIT PROTECTION 2 VO BANDGAP REFERENCE 1.25V _ + R1 HIGH / LOW VEN 4 OUTPUT ON/OFF R2 TTL COMPATIBLE BUFFER 3 GND Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics (VIN=5V, CIN=10µF, COUT =47µF, TA=25°C, unless otherwise noted.) Line Transient Response G9105 Load Transient Response Short Circuit-Current Output Noise Ripple Rejection 40 35 30 Ripple Rejection (dB) VEN -ON IL=1A IL=500mA 25 20 15 10 5 0 10 100 1000 10000 100000 1000000 Frequency (Hz) Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) Dropout Voltage vs. Temperature 600 500 Dropout Voltage (mV) 400 300 200 100 0 -40 ILIL=1A =1A Load Regulation (%) 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -20 0 20 40 60 80 100 -1 -40 -20 0 20 40 60 V IN=7V IL=100mA~1A V IN=6V G9105 Load Regulation 80 100 Temperature (°C) Temperature (°C) Output Voltage vs. Temperature 5.25 5.2 Quiescent Current (mA) 5.15 5.1 V OUT (V) 5.05 5 4.95 4.9 4.85 4.8 4.75 -40 -20 0 20 40 60 Temperature ( °C) 80 100 V IN=6V V IN=7V IL=0.5A 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 Quiescent Current vs. Temperature V IN=7V V IN=6V 2 -40 -20 0 20 40 60 Temperature ( °C) 80 100 Output Voltage vs. Disable Voltage 7 6 Output Voltage VOUT (V) 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 3.5 4 Disable Voltage Vdis(V) Output Voltage VOUT ( V) 6 5 4 3 2 1 0 0 Output Voltage vs. Input Voltage IL=0A IL=1A 1 2 3 4 5 6 7 Input Voltage V IN ( V) Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 5 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G9105 Quiescent Current vs. Input Voltage 4.5 4 Quiescent Current IQ (mA) Power Dissipation vs. Temperature (TO-220F) 6 5 Power Dissipation (W) 3.5 3 2.5 2 1.5 1 0.5 0 0 1 2 3 4 5 Input Voltage VIN(V) 6 7 heatsink 4 3 2 1 0 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature (°C ) without heatsink Recommended Minimum Footprint Heatsink Package Dimension TO-220F-4 SOP-8 Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 6 Global Mixed-mode Technology Inc. Package Information E1 L b D e L2 L1 E G9105 A A1 He TO-220F-4 Package (short lead) DIMENSION IN MM NOM. 4.57 2.79 1.78 10.10 6.95 8.64 7.35 16.66 3.70 22.94 0.48 2.54(TYP) 0.635(TYP) 7° SYMBOL A A1 A2 D E E1 L L1 L2 He C e b θ MIN. 4.42 2.69 1.68 10.00 6.85 8.54 7.15 16.56 3.60 22.54 ------------4° MAX. 4.72 2.89 1.88 10.20 7.05 8.74 7.55 16.76 3.80 23.34 ------------11 ° Ver: 0.9 Preliminary Jul 07, 2006 7 θ C A2 MIN. 0.174 0.106 0.066 0.394 0.269 0.336 0.281 0.652 0.142 0.887 ------------4° DIMENSION IN INCH NOM. 0.180 0.110 0.070 0.398 0.273 0.340 0.289 0.656 0.146 0.903 0.019 0.1(TYP) 0.025(TYP) 7° MAX. 0.186 0.114 0.074 0.402 0.278 0.344 0.297 0.660 0.150 0.919 ------------11 ° TEL: 886-3-5788833 http://www.gmt.com.tw Global Mixed-mode Technology Inc. G9105 E1 L b D e L2 L1 E A A1 He TO-220F-4 Package (long lead) SYMBOL A A1 A2 D E E1 L L1 L2 He C e b θ MIN. 4.42 2.69 1.68 10.00 6.85 8.54 13.15 16.56 3.60 28.44 ------------4° DIMENSION IN MM NOM. 4.57 2.79 1.78 10.10 6.95 8.64 13.35 16.66 3.70 28.94 0.48 2.54(TYP) 0.635(TYP) 7° MAX. 4.72 2.89 1.88 10.20 7.05 8.74 13.55 16.76 3.80 29.44 ------------11 ° Ver: 0.9 Preliminary Jul 07, 2006 8 θ C A2 MIN. 0.174 0.106 0.066 0.394 0.269 0.336 0.518 0.652 0.142 1.119 ------------4° DIMENSION IN INCH NOM. 0.180 0.110 0.070 0.398 0.273 0.340 0.526 0.656 0.146 1.139 0.019 0.1(TYP) 0.025(TYP) 7° MAX. 0.186 0.114 0.074 0.402 0.278 0.344 0.533 0.660 0.150 1.159 ------------11 ° TEL: 886-3-5788833 http://www.gmt.com.tw Global Mixed-mode Technology Inc. C G9105 E H L D θ 7 °(4X) A2 A1 e B A y SOP-8 Package Note: 1. Package body sizes exclude mold flash and gate burrs 2. Dimension L is measured in gage plane 3. Tolerance 0.10mm unless otherwise specified 4. Controlling dimension is millimeter converted inch dimensions are not necessarily exact. SYMBOL A A1 A2 B C D E e H L y θ MIN. 1.35 0.10 ----0.33 0.19 4.80 3.80 ----5.80 0.40 ----0° DIMENSION IN MM NOM. 1.60 ----1.45 ----------------1.27 ----------------- MAX. 1.75 0.25 ----0.51 0.25 5.00 4.00 ----6.20 1.27 0.10 8° MIN. 0.053 0.004 ----0.013 0.007 0.189 0.150 ----0.228 0.016 ----0° DIMENSION IN INCH NOM. 0.063 ----0.057 ----------------0.050 ----------------- MAX. 0.069 0.010 ----0.020 0.010 0.197 0.157 ----0.244 0.050 0.004 8° Taping Specification PACKAGE TO-220F-4 SOP-8 Feed Direction Typical SOP Package Orientation Q’TY/BY TUBE 50 ea --- Q’TY/REEL --2,500 ea GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. Ver: 0.9 Preliminary Jul 07, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 9