G924-430T1U

Global Mixed-mode Technology Inc. G924 300mA Low-Noise LDO Regulators Features Low, 90µA No-Load Supply Current Guaranteed 300mA Output Current Dropout Voltage is 200mV @ 150mA Load PSRR=53dB @ 1kHz Over-Temperature Protection and Short-Circuit Protection Max. Supply Current in Shutdown Mode < 1µA Low Output Noise at 28µVRMS Stable with low cost ceramic capacitors Output voltage: 1.20V~5.00V General Description The G924 is a low supply current, low dropout linear regulator that comes in a space saving SOT-23-5 package. The supply current at no-load is 90µA. In the shutdown mode, the maximum supply current is less than 1µA. Operating voltage range of the G924 is from 2.5V to 5.5V. The over-current protection limit is set at 550mA typical and 400mA minimum. An over-temperature protection circuit is built-in in the G924 to prevent thermal overload. These power saving features make the G924 ideal for use in the batterypowered applications such as notebook computers, cellular phones, and PDA’s. Applications Notebook Computers Cellular Phones PDAs Digital still Camera and Video Recorders Hand-Held Devices Audio Codec Pin Configuration Typical Application Circuit SHDN 1 5 VIN VIN OUT OUTPUT VOLTAGE GND 2 G924 4 SOT-23-5 OUT OUT ＋C BATTERY G924 IN _ 1µF SHDN BYP GND COUT 1µF CBYP 10nF BYP 3 Fixed mode Ver: 0.2 Preliminary Oct 01, 2004 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. Ordering Information ORDER NUMBER G924-330T1U G924 TEMP. RANGE -40°C~ +85°C ORDER NUMBER (Pb free) G924-330T1Uf MARKING 94AXx VOLTAGE 3.30V PACKAGE SOT-23-5 For other output voltage, please contact us at sales@gmt.com.tw Note: T1: SOT-23-5 U: Tape & Reel Selector Guide ORDER NUMBER G924-120T1U G924-130T1U G924-140T1U G924-150T1U G924-160T1U G924-170T1U G924-180T1U G924-190T1U G924-200T1U G924-210T1U G924-220T1U G924-230T1U G924-240T1U G924-250T1U G924-260T1U G924-270T1U G924-280T1U G924-285T1U G924-290T1U G924-300T1U G924-310T1U G924-315T1U G924-320T1U G924-330T1U G924-340T1U G924-350T1U G924-360T1U G924-370T1U G924-380T1U G924-390T1U G924-400T1U G924-410T1U G924-420T1U G924-430T1U G924-440T1U G924-450T1U G924-460T1U G924-470T1U G924-475T1U G924-480T1U G924-490T1U G924-500T1U ORDER NUMBER (Pb free) G924-120T1Uf G924-130T1Uf G924-140T1Uf G924-150T1Uf G924-160T1Uf G924-170T1Uf G924-180T1Uf G924-190T1Uf G924-200T1Uf G924-210T1Uf G924-220T1Uf G924-230T1Uf G924-240T1Uf G924-250T1Uf G924-260T1Uf G924-270T1Uf G924-280T1Uf G924-285T1Uf G924-290T1Uf G924-300T1Uf G924-310T1Uf G924-315T1Uf G924-320T1Uf G924-330T1Uf G924-340T1Uf G924-350T1Uf G924-360T1Uf G924-370T1Uf G924-380T1Uf G924-390T1Uf G924-400T1Uf G924-410T1Uf G924-420T1Uf G924-430T1Uf G924-440T1Uf G924-450T1Uf G924-460T1Uf G924-470T1Uf G924-475T1Uf G924-480T1Uf G924-490T1Uf G924-500T1Uf OUTPUT VOLTAGE (V) 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.85 2.90 3.00 3.10 3.15 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 MARKING 94AAx 94ABx 94ACx 94ADx 94AEx 94AFx 94AGx 94AHx 94AIx 94AJx 94AKx 94ALx 94AMx 94ANx 94AOx 94APx 94AQx 94ARx 94ASx 94ATx 94AUx 94AVx 94AWx 94AXx 94AYx 94AZx 94BAx 94BBx 94BCx 94BDx 94BEx 94BFx 94BGx 94BHx 94BIx 94BJx 94BKx 94BLx 94BMx 94BNx 94BOx 94BPx Ver: 0.2 Preliminary Oct 01, 2004 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Inc. Absolute Maximum Ratings VIN to GND.………………………………-0.3V to +6.5V Output Short-Circuit Duration…….….……….…Infinite SHDN to GND……..………....….….-0.3V to VIN+0.3V OUT to GND………………………-0.3V to (VIN + 0.3V) Continuous Power Dissipation (TA = +25°C) SOT-23-5………..…………..……….……….…520mW Note (1): See Recommended Minimum Footprint G924 Operating Temperature Range…….....-40°C to +85°C Junction Temperature………………...………+150°C θ JA (1) ….…..…………….……….…..…..240°C/Watt Storage Temperature Range……….-65°C to +150°C Reflow Temperature (soldering, 10sec)…..…….260°C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics (VIN =5V, V SHDN =VIN, TA =TJ =25°C, unless otherwise noted.) (Note 1) PARAMETER Input Voltage (Note 2) Output Voltage Accuracy Maximum Output Current Current Limit (Note 3) Short Circuit Current Ground Pin Current ILIM Isc IQ VOUT=1.50V VOUT=1.80V VOUT=2.50V Dropout Voltage (Note 4) VDROP IOUT =300mA VOUT=3.00V VOUT=3.30V VOUT=4.75V VOUT=5.00V Line Regulation Load Regulation Ripple Rejection Output Voltage Noise (10Hz to 100kHz) SHUTDOWN SHDN Input Threshold SYMBOL VIN CONDITION VOUT≥2.50V, IOUT=1mA MIN TYP MAX UNIT 2.5 -2 -3 -4 300 400 ------------------------------------550 280 90 1.36 1.10 0.58 0.41 0.36 0.25 0.24 0.06 0.02 53 28 5.5 2 3 4 ------------------------------%/V %/mA dB µVRMS V mA mA mA µA % V VOUT 2.50V>VOUT≥1.80V, IOUT=1mA 1.80V>VOUT≥1.20V, IOUT=1mA ∆VLNR ∆VLDR PSRR en VIN=VOUT+0.1V,to 5.5V IOUT=10mA IOUT = 10mA to 300mA F=1kHz, 0.45VP-P, IOUT=10mA COUT = 1µF, IOUT = 1mA, CBYP = 10nF VIH VIL I SHDN IQSHDN TSHDN ∆TSHDN Regulator enabled Regulator shutdown V SHDN = VIN VOUT = 0V TA = +25°C TA = +25°C 1.5 ----------- ----0.003 0.2 145 25 --0.4 1 1 ----- V µA µA °C °C SHDN Input Bias Current Shutdown Supply Current THERMAL PROTECTION Thermal Shutdown Temperature Thermal Shutdown Hysteresis Note 1: Limits is 100% production tested at TA= +25°C. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note 2: Guaranteed by line regulation test. Note 3: Not tested. For design purposes, the current limit should be considered 400mA minimum. Note 4: The dropout voltage is defined as (VIN-VOUT) when VOUT is 100mV below the target value of VOUT. The performance of every G924 part, see “Typical Performance Characteristics”. Ver: 0.2 Preliminary Oct 01, 2004 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics (VIN =5V, CIN=1µF, COUT=1µF, V SHDN = VIN, G924-475, TA =25°C, unless otherwise noted.) G924 Load Transient Line Transient Short Circuit Current 70 60 50 PSRR (dB) 40 30 20 10 0 0.01 200mA Ripple Rejection 100mA 300mA VIN=6V ; CIN=1µF ; COUT=1µF CBYP=10nF ; Vr=224mv 0.1 1 10 Frequency (KHz) 100 Turn-ON Turn-OFF Ver: 0.2 Preliminary Oct 01, 2004 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G924 Dropout Voltage vs. IL Overcurrent Protection Characteristics 300 250 Dropout Voltage (mV) 200 150 100 50 0 0 50 TA=85°C TA=25°C TA=-25°C 100 150 IL (mA) 200 250 300 Output Voltage vs. Temperature 5.2 5.1 5.0 Output Voltage (V) 4.9 4.8 4.7 4.6 4.5 4.4 4.3 4.2 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature (°C) VIN=5.0V VIN=5.5V IL=10mA Output Noise Safe Operating Area [Power Dissipation Limit] 400 350 Output Current (mA) 300 250 200 150 100 50 0 0.1 0.4 0.7 1.0 1.3 1.6 1.9 2.2 Input-Output Voltage Differential VIN-VOUT (V) Note: VIN(max)