1.5SMC6.8CA

1.5SMC6.8A thru 1.5SMC550CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8V to 550V Features            Glass passivated junction chip Low incremental surge resistance Low inductance Excellent clamping capability 1500W peak pulse power capability with a 10/1000uS waveform, repetition rate (duty cycle): 0.01% Fast response time IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact) ESD protection of data lines in accordance with IEC61000-4-2 EFT protection of data lines in accordance with IEC61000-4-4 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Moisture sensitivity level MSL=1 DO-214AB(SMC) Mechanical Data ■ ■ ■ ■ Case: JEDEC DO-214AB (SMC) molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: For uni-directional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation Weight: 0.007oz., 0.21g Absolute Maximum Ratings (TA=25°C unless otherwise specified) Parameter Symbol Value Unit PPPM Minimum 1500 W IPPM See Next Table A PM(AV) 6.5 W Peak Forward Surge Current 8.3mS Single Half SineWave Uni-directional only2 IFSM 200 A Thermal Resistance Junction to Ambient Air3 RθJA 75 °C/W Thermal Resistance Junction to Leads RθJL 15 °C/W TJ, TSTG -55 to +150 °C Peak Pulse Power Dissipation with a 10/1000uS Peak Pulse Current with a 10/1000uS Waveform1, 2 Waveform1 (Fig. 1) (Fig. 3) Power Dissipation on Infinite Heatsink, TA =50°C Operating Junction and Storage Temperature Range Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2 2. Mounted on 0.31 x 0.31" (8.0 x 8.0mm) copper pads to each terminal 3.Mounted on minimum recommended pad layout 1/5 1.5SMC6.8A thru 1.5SMC550CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8V to 550V Electrical Characteristics TA=25°C unless otherwise specified, VF=3.5V at IF=100A (uni-directional only) Part Number (Uni) Part Number (Bi) Marking Code Breakdown Voltage1 VBR UNI BI Test Current IT Maximum Maximum StandMaximum Maximum Reverse Peak off Clamping Temperature 3 Pulse Leakage Voltage Voltage Coefficient 2 @ Vwm Current VC V(BR) VWM ID I PPM @I PPM Min. Max. V V mA V μA A V (% / °C) 1.5SMC6.8A 1.5SMC6.8CA 6V8A 6V8C 6.45 7.14 10 5.8 1000 143 10.5 0.057 1.5SMC7.5A 1.5SMC7.5CA 7V5A 7V5C 7.13 7.88 10 6.4 500 133 11.3 0.061 1.5SMC8.2A 1.5SMC8.2CA 8V2A 8V2C 7.79 8.61 10 7.02 200 124 12.1 0.065 1.5SMC9.1A 1.5SMC9.1CA 9V1A 9V1C 8.65 9.55 1 7.78 50 112 13.4 0.068 1.5SMC10A 1.5SMC10CA 10A 10C 9.5 10.5 1 8.55 10 103 14.5 0.073 1.5SMC11A 1.5SMC11CA 11A 11C 10.5 11.6 1 9.4 5 96.2 15.6 0.075 1.5SMC12A 1.5SMC12CA 12A 12C 11.4 12.6 1 10.2 5 89.8 16.7 0.078 1.5SMC13A 1.5SMC13CA 13A 13C 12.4 13.7 1 11.1 5 82.4 18.2 0.081 1.5SMC15A 1.5SMC15CA 15A 15C 14.3 15.8 1 12.8 1 70.8 21.2 0.084 1.5SMC16A 1.5SMC16CA 16A 16C 15.2 16.8 1 13.6 1 66.7 22.5 0.086 1.5SMC18A 1.5SMC18CA 18A 18C 17.1 18.9 1 15.3 1 59.5 25.2 0.089 1.5SMC20A 1.5SMC20CA 20A 20C 19 21 1 17.1 1 54.2 27.7 0.09 1.5SMC22A 1.5SMC22CA 22A 22C 20.9 23.1 1 18.8 1 49 30.6 0.092 1.5SMC24A 1.5SMC24CA 24A 24C 22.8 25.2 1 20.5 1 45.2 33.2 0.094 1.5SMC27A 1.5SMC27CA 27A 27C 25.7 28.4 1 23.1 1 40 37.5 0.096 1.5SMC30A 1.5SMC30CA 30A 30C 28.5 31.5 1 25.6 1 36.2 41.4 0.097 1.5SMC33A 1.5SMC33CA 33A 33C 31.4 34.7 1 28.2 1 32.8 45.7 0.098 1.5SMC36A 1.5SMC36CA 36A 36C 34.2 37.8 1 30.8 1 30.1 49.9 0.099 1.5SMC39A 1.5SMC39CA 39A 39C 37.1 41 1 33.3 1 27.8 53.9 0.1 1.5SMC43A 1.5SMC43CA 43A 43C 40.9 45.2 1 36.8 1 25.3 59.3 0.101 1.5SMC47A 1.5SMC47CA 47A 47C 44.7 49.4 1 40.2 1 23.1 64.8 0.101 1.5SMC51A 1.5SMC51CA 51A 51C 48.5 53.6 1 43.6 1 21.4 70.1 0.102 1.5SMC56A 1.5SMC56CA 56A 56C 53.2 58.8 1 47.8 1 19.5 77 0.103 1.5SMC62A 1.5SMC62CA 62A 62C 58.9 65.1 1 53 1 17.6 85 0.104 1.5SMC68A 1.5SMC68CA 68A 68C 64.6 71.4 1 58.1 1 16.3 92 0.104 1.5SMC75A 1.5SMC75CA 75A 75C 71.3 78.8 1 64.1 1 14.6 104 0.105 1.5SMC82A 1.5SMC82CA 82A 82C 77.9 86.1 1 70.1 1 13.3 113 0.105 1.5SMC91A 1.5SMC91CA 91A 91C 86.5 95.5 1 77.8 1 12 125 0.106 2/5 1.5SMC6.8A thru 1.5SMC550CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8V to 550V Electrical Characteristics TA=25°C unless otherwise specified, VF=3.5V at IF=100A (uni-directional only) Part Number (Uni) Part Number (Bi) Marking Code Breakdown Voltage1 Test Current VBR UNI BI IT Maximum Maximum StandMaximum Maximum Reverse Peak off Clamping Temperature Pulse Leakage3 Voltage Voltage Coefficient 2 @ Vwm Current VC V(BR) VWM ID I PPM @I PPM Min. Max. V V mA V μA A V (% / °C) 1.5SMC100A 1.5SMC100CA 100A 100C 95 105 1 85.5 1 10.9 137 0.106 1.5SMC110A 1.5SMC110CA 110A 110C 105 116 1 94 1 9.9 152 0.107 1.5SMC120A 1.5SMC120CA 120A 120C 114 126 1 102 1 9.1 165 0.107 1.5SMC130A 1.5SMC130CA 130A 130C 124 137 1 111 1 8.4 179 0.107 1.5SMC150A 1.5SMC150CA 150A 150C 143 158 1 128 1 7.2 207 0.106 1.5SMC160A 1.5SMC160CA 160A 160C 152 168 1 136 1 6.8 219 0.108 1.5SMC170A 1.5SMC170CA 170A 170C 162 179 1 145 1 6.4 234 0.108 1.5SMC180A 1.5SMC180CA 180A 180C 171 189 1 154 1 6.1 246 0.108 1.5SMC200A 1.5SMC200CA 200A 200C 190 210 1 171 1 5.5 274 0.108 1.5SMC220A 1.5SMC220CA 220A 220C 209 231 1 185 1 4.6 328 0.108 1.5SMC250A 1.5SMC250CA 250A 250C 237 263 1 214 1 4.4 344 0.108 1.5SMC300A 1.5SMC300CA 300A 300C 285 315 1 256 1 3.7 414 0.108 1.5SMC350A 1.5SMC350CA 350A 350C 332 368 1 300 1 3.2 482 0.108 1.5SMC400A 1.5SMC400CA 400A 400C 380 420 1 342 1 2.8 548 0.108 1.5SMC440A 1.5SMC440CA 440A 440C 418 462 1 376 1 2.5 602 0.108 1.5SMC480A 1.5SMC480CA 480A 480C 456 504 1 408 1 2.3 658 0.108 1.5SMC510A 1.5SMC510CA 510A 510C 485 535 1 434 1 2.1 698 0.108 1.5SMC530A 1.5SMC530CA 530A 530C 503.5 556.5 1 477 1 2.1 725 0.108 1.5SMC540A 1.5SMC540CA 540A 540C 1 459 1 2 740 0.108 1.5SMC550A 1.5SMC550CA 550A 550C 522.5 577.5 1 495 1 2 760 0.108 Notes: 513 567 1. V(BR) measured after IT applied for 300uS, IT=square wave pulse or equivalent 2.Surge current waveform per Fig. 3 and derate per Fig. 2 3.For bidirectional types with VR 10 volts and less, the ID limit is doubled 3/5 1.5SMC6.8A thru 1.5SMC550CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8V to 550V Ratings and Characteristic Curves (TA = 25 °C unless otherwise noted) 4/5 1.5SMC6.8A thru 1.5SMC550CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8V to 550V Package Outline Dimensions DO-214AB(SMC) DIM on uni-directional only A A1 B C D E HE L SMC (DO-214AB) Millimeters Min. Max. 2.00 2.62 0.00 0.20 2.92 3.07 0.15 0.31 5.59 6.22 6.60 7.11 7.75 8.13 0.76 1.52 Inches Min. 0.079 0.000 0.115 0.006 0.220 0.260 0.305 0.030 Max. 0.103 0.008 0.121 0.012 0.245 0.280 0.320 0.060 Recommended Pad Layout Recommended Pad Layout (Reference ONLY) Millimeters Inches DIM Min. Max. Min. Max. J 4.60 0.181 K 3.20 0.126 M 2.00 0.079 - www.goodarksemi.com 5/5/ Doc.US1.5SMCxxSD3.2 Nov.2022