1S5G

1S1G thru 1S9G Glass Passivated Super Fast Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Case: Molded plastic R-1 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 0.007 ounce, 0.20 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current .375" (9.5mm) lead length @TA=55oC Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ 1.0A Maximum DC reverse current at rated DC blocking voltage @ TA=25 C @ TA=125oC o Symbols VRRM VRMS V DC I(AV) IFSM VF IR trr CJ TJ TSTG 1S 1G 50 35 50 1S 2G 100 70 100 1S 3G 150 105 150 1S 4G 200 140 200 1S 5G 300 210 300 1.0 1S 6G 400 280 400 1S 7G 600 420 600 1S 8G 800 560 800 1S 9G 1000 700 1000 Units Volts Volts Volts Amp 30.0 0.95 5.0 100 35 40 -55 to +150 -55 to +150 25 1.3 1.7 Amps Volts uA uA nS pF o Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction temperature range Storage temperature range C C o Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 223 RATINGS AND CHARACTERISTIC CURVES 224