ES2BA

ES2AA thru ES2JA Super Fast Surface Mount Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Features       Glass passivated chip Super fast switching for high efficiency For surface mounted applications Low forward voltage drop and high current capability Low reverse leakage current Plastic material used carries underwriters laboratory classification 94V-0 DO-214AC (SMA) Absolute Maximum Ratings (TA=25°C unless otherwise noted） Parameter Symbol ES2AA ES2BA ES2CA ES2DA ES2FA ES2GA ES2JA Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 V Maximum Average Forward Rectified Current @ TL=110°C IF(AV) 2.0 A Peak Forward Surge Current 8.3 ms Single Half Sine-wave Superimposed on Rated Load IFSM 50 A RθJA 77 RθJC 33 RθJL 7 TJ -55 to +150 °C TSTG -55 to +150 °C Typical Thermal Resistance1 Operating Junction Temperature Range Storage Temperature Range °C/W Electrical Characteristics (TA=25°C unless otherwise noted） Parameter Test Conditions Symbol ES2AA ES2BA ES2CA ES2DA ES2FA ES2GA ES2JA Maximum Instantaneous Forward Voltage IF=2.0A, DC 0.92 VF 1.25 1.7 Unit V Maximum DC Reverse Current at Rated DC Blocking Voltage TL=25°C Typical Reverse Recovery Time IF=0.5A, IR=1.0A, IRR=0.25A trr 35 nS Typical Junction Capacitance 4.0V 1MHz CJ 25 pF TL=125°C 5 IR 350 Notes:1. The thermal resistance from junction to ambient,case or lead,mounted on P.C.B with 5×5mm copper pads, 2 OZ, FR4 PCB. 1/3 uA ES2AA thru ES2JA Super Fast Surface Mount Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Peak Forward Surge Current (A) Number of Cycles at 60Hz Figure 2. Maximum Non‐Repetitive Surge Current Instantaneous Forward Voltage (V) Figure 3. Typical Forward Characteristics Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) Instantaneous Reverse Current (uA) Lead Temperature (°C) Figure 1. Forward Current Derating Curve Instantaneous Forward Current (A) Average Forward Current (A) Typical Characteristics Curves Reverse Voltage (V) Figure 5. Typical Junction Capacitance 2/3 ES2AA thru ES2JA Super Fast Surface Mount Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Package Outline Dimensions DO-214AC (SMA) HE E D B DIM A cathode band A A1 B C D E HE L SMA (DO-214AC) Millimeters Inches Min. Min. Max. Max. 0.075 0.091 1.90 2.30 0.000 0.20 0.008 0.00 0.049 0.065 1.25 1.65 0.006 0.012 0.15 0.31 0.093 0.114 2.35 2.90 0.181 0.157 3.99 4.60 0.189 0.209 4.80 5.30 0.030 0.060 0.76 1.52 C A1 L Recommended Pad Layout K J M www.goodarksemi.com M Recommended Pad Layout (Reference ONLY) Millimeters Inches DIM Min. Max. Min. Max. J 2.20 0.087 K 1.72 0.068 M 2.00 0.079 - 3/3 Doc.USES2xAxGD3.1 Aug.2022