ES2D

ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Features ■ ■ ■ ■ ■ Glass passivated superfast recovery rectifiers Low leakage current Moisture sensitivity: level 1, per J-STD-020 High temperature soldering 260°C/10 seconds at terminals Plastic material used carries underwriters laboratory classification 94V-0 DO-214AA (SMB) Absolute Maximum Ratings (TA=25°C unless otherwise noted） Parameter Symbol ES2A ES2B ES2C ES2D ES2F ES2G ES2J Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 V VDC 50 100 150 200 300 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current IF(AV) 2.0 A Peak Forward Surge Current 8.3 ms Single Half Sine-wave Superimposed on Rated Load IFSM 50 A Rating for Fusing (t＜8.3ms) I2t 10.0 A2sec Operating Junction Temperature Range TJ -55 to +150 °C TSTG -55 to +150 °C Storage Temperature Range Electrical Characteristics (TA=25°C unless otherwise noted） Parameter Test Conditions Symbol ES2A ES2B Maximum Instantaneous Forward Voltage IF=2.0A, TA=25°C IR Typical Reverse Recovery Time IF=0.5A, IR=1.0A, IRR=0.25A trr Typical Junction Capacitance 4.0V 1MHz ES2D 0.95 VF Maximum DC Reverse Current TA=25°C at Rated DC Blocking Voltage TA=100°C ES2C ES2F ES2G ES2J 1.3 1.7 10 35 25 V uA 100 CJ Unit nS 20 pF Typical Thermal Resistance Junction to Ambient1 RθJA 75 °C/W Typical Thermal Resistance Junction to Lead1 RθJL 25 °C/W Notes: 1. The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB 1/3 ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Average Forward Current (A) Peak Forward Surge Current (A) Typical Characteristics Curves Number of Cycles at 60Hz Figure 2. Maximum Non‐Repetitive Peak Forward Surge Current Instantaneous Reverse Current (uA) Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Percent of Rated Peak Reverse Voltage(%) Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) Instantaneous Forward Current (A) Lead Temperature (°C) Figure 1. Forward Current Derating Curve Reverse Voltage (V) Figure 5. Typical Junction Capacitance 2/3 ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifiers Reverse Voltage 50V- 600V Forward Current 2A Package Outline Dimensions DO-214AA (SMB) DIM A A1 B C D E HE L SMB (DO-214AA) Millimeters Min. Max. 1.99 2.61 0.00 0.20 1.93 2.08 0.15 0.31 3.48 3.73 4.25 4.75 5.26 5.46 0.90 1.41 Inches Min. 0.078 0.000 0.076 0.006 0.137 0.167 0.207 0.035 Max. 0.103 0.008 0.082 0.012 0.147 0.187 0.215 0.056 Recommended Pad Layout SMB Recommended Pad Layout (Reference Only) Millimeters Inches DIM Min. Max. Min. Max. J 2.60 0.102 K 2.20 0.087 M 1.80 0.071 - www.goodarksemi.com 3/3 Doc.USES2xxGD2.0 May.2021