ES3J

ES3A thru ES3M Super Fast Recovery Rectifiers Reverse Voltage 50V-1000V Forward Current 3A Features ■ ■ ■ ■ ■ ■ Glass passivated superfast recovery rectifiers Low profile package Built-in strain relief Ideal for automated placement High temperature soldering 250°C/10seconds at terminals Plastic material used carries underwriters laboratory classification 94V-0 DO-214AB (SMC) Absolute Maximum Ratings (TA=25°C unless otherwise noted） Parameter Symbol ES3A ES3B ES3C ES3D ES3F ES3G ES3J ES3K ES3M Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) 3.0 A Peak Forward Surge Current 8.3 ms Single Half Sine-wave Superimposed on Rated Load (TL=100°C) IFSM 100 A Operating Junction Temperature Range Storage Temperature Range TJ -55 to +150 °C TSTG -55 to +150 °C Electrical Characteristics (TA=25°C unless otherwise noted） Parameter Symbol ES3A ES3B ES3C ES3D ES3F ES3G ES3J ES3K ES3M Unit Maximum Instantaneous Forward Voltage @3.0A VF 0.95 Typical Junction Capacitance2 CJ 50 Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Reverse Recovery Time 1 Typical Thermal Resistance Junction to Ambient3 Typical Thermal Resistance Junction to Lead3 Notes: IR (TA=25°C) 1.7 1.3 40 V pF 10 uA IR (TA=100°C) 500 uA trr 35 nS RθJA 47 °C/W RθJL 12 °C/W 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied VR=4.0 Volts 3. Units Mounted on P.C.B. with 0.31 x 0.31" (8.0 x 8.0mm) Copper Pad Areas 1/3 ES3A thru ES3M Super Fast Recovery Rectifiers Reverse Voltage 50V-1000V Forward Current 3A Average Forward Current (A) Peak Forward Surge Current (A) Typical Characteristics Curves Lead Temperature (°C) Figure 1.Forward Current Derating Curve Instantaneous Reverse Current (A) Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Percent of Rated Peak Reverse Voltage(%) Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) Instantaneous Forward Current (A) Number of Cycles at 60Hz Figure 2. Maximum Non‐Repetitive Peak Forward Surge Current Reverse Voltage (V) Figure 5. Typical Junction Capacitance 2/3 ES3A thru ES3M Super Fast Recovery Rectifiers Reverse Voltage 50V-1000V Forward Current 3A Package Outline Dimensions DO-214AB (SMC) DIM A A1 B C D E HE L SMC (DO-214AB) Millimeters Min. Max. 2.00 2.62 0.00 0.20 2.92 3.07 0.15 0.31 5.59 6.22 6.60 7.11 7.75 8.13 0.76 1.52 Inches Min. 0.079 0.000 0.115 0.006 0.220 0.260 0.305 0.030 Max. 0.103 0.008 0.121 0.012 0.245 0.280 0.320 0.060 Recommended Pad Layout SMC Recommended Pad Layout (Reference ONLY) Millimeters Inches DIM Min. Max. Min. Max. J 4.60 0.181 K 3.20 0.126 M 2.00 0.079 - www.goodarksemi.com 3/3 Doc.USES3xxGD2.0 Jan..2021