GR1M

GR1A thru GR1M Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.0A Features • • • • • • • Glass passivated Fast Recovery rectifiers Ideal for automated placement Low forward voltage drop High current capability Low reverse leakage currrent Solder dip 260 °C, 10 s Add suffix "E" for Halogen Free DO-214AC(SMA) Typical Applications For use of fast switching rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sinewave superimposed on rated load Operating junction and storage temperature range Electrical Characteristics Test Conditions Maximum instantaneous forward voltage 1.0 A TA=25℃ TA=125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery time Irr=0.25A Typical junction capacitance Typical thermal resistance(1) 4.0 V, 1 MHz GR1A GR1B GR1D GR1G GR1J GR1K GR1M Unit VRRM VRMS VDC IF(AV) 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 1.0 600 800 1000 V A IFSM 30 A TJ, TSTG - 55 to + 150 °C (TA = 25 °C unless otherwise noted) Parameter Maximum DC reverse current at rated DC blocking voltage Symbol Symbol GR1A GR1B GR1D VF GR1G GR1J GR1K GR1M 1.3 Volts 5 IR µA 50 trr 150 250 CJ 7.6 RθJA 61 RθJC 30 RθJL 6 Unit 500 nS pF ℃/W Note:1),The thermal resistance from junction to lead,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2017.07-Rev.B GR1A thru GR1M Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.0A Ratings and Characteristics Curves 1 0.8 0.6 0.4 FR-4 PCB with 5*5mm copper pad,2 OZ 0.2 30 Peak Forward Surge Current （A） Average Forward Rectified Current, （A） (TA = 25℃ unless otherwise noted) 1.2 25 20 15 10 5 0 1 0 0 25 50 75 100 125 150 Temperature（℃） 10 Number of Cycles at 60Hz 100 Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve 10000 100 25℃ 1000 125℃ 150℃ 100 10 1 0.1 0.01 Junction Capacitance (pF) Instantaneous Reverse Current (uA) Ta=25℃ 8.3ms single half sine-wave 0.001 Tj=25℃ f=1.0MHZ Vsig=50mVp-p 10 1 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 0.1 Figure 3. Typical Reverse Characteristics 1 Reverse Voltage (V) 10 Figure 4. Typical Junction Capacitance Instantaneous Forward Current (A) 10 25℃ 125℃ 1 150℃ 0.1 0.01 0 0.3 0.6 0.9 1.2 1.5 1.8 Instantaneous Forward Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2017.07-Rev.B GR1A thru GR1M Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.0A Package Outline Dimensions in inches (millimeters) Packing Information 7500 pcs/Reel, 18 Reels/Box; 12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 Symbols SMA(mm) W E F D0 D1 P0 P1 P2 A0 B0 12±0.2 1.75±0.1 5.5±0.05 1.5±0.1 1.50 +0.1/-0 4.0±0.1 4.0±0.1 2.0±0.05 2.65±0.1 5.25±0.1 2017.07-Rev.B GR1A thru GR1M Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any thirdparty ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2017.07-Rev.B