GSL6TVS43A

GSL6TVS10A thru GSL6TVS180A Surface Mount Transient Voltage Suppressors Peak Pulse Power 600W Stand-off Voltage10V to 180V Features • • • • • • Glass passivated junction Excellent clamping capability and fast response time 600W peak pulse power capability with a 10/1000 uS waveform Moisture sensitivity: y level 1,, p per J-STD-020 Polarity: Uni-directional Low profile package with built-in strain relief for surface mounted applications eSGB (SMAF) Applications For use in sensitive electronics protection against voltage transients induced by lightning or inductive load switching. Key applications include protection of I/O interfaces, industrial and LED lighting applications, DC power buses, and other vulnerable circuits used in consumer electronics. Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted) Parameter Symbol Value Unit 600 W Peak Power Dissipation With a 10/1000 uS Waveform PPPM1, 2 Peak Pulse Current With a 10/1000 uS Waveform IPPM1 See Next Table A Peak Forward Surge Current, 8.3 mS Single Half Sine-Wave IFSM3 80 A Typical Thermal Resistance Junction To Lead RθJL 20 °C/W Typical Thermal Resistance Junction To Ambient RθJA 100 °C/W -55 to +150 °C Operating Junction and Storage Temperature Range TJ, TSTG Notes: 1. Non-repetitive current, per Fig.3 and derated above TA=25 ℃ per Fig.2. 2. Mounted on copper pad area of 0.2x0.2" (5.0x5.0mm) to each terminal. 3. Measured on 8.3 mS single half sine wave or equivalent square for unidirectional device only, Fig.4. 1/4 GSL6TVS10A thru GSL6TVS180A Surface Mount Transient Voltage Suppressors Peak Pulse Power 600W Stand-off Voltage10V to 180V Electrical Characteristics (TA = 25 °C unless otherwise noted) Part Number (Uni) Marking Reverse Stand off Voltage VR (Volts) Uni Breakdown Voltage VBR (Volts) @ IT Min Max Maximum Test Current Clamping IT (mA) Voltage VC @ IPP (V) Maximum Maximum Peak Pulse Reverse Current Ipp Leakage IR @ (A) VR (µA) GSL6TVS10A L610A 10 11.1 12.3 1 17 35.3 2.5 GSL6TVS11A L611A 11 12.2 13.5 1 18.2 33 2.5 GSL6TVS12A L612A 12 13.3 14.7 1 19.9 30.2 2.5 GSL6TVS13A L613A 13 14.4 15.9 1 21.5 27.9 0.1 GSL6TVS14A L614A 14 15.6 17.2 1 23.2 25.9 0.1 GSL6TVS15A L615A 15 16.7 18.5 1 24.4 24.6 0.1 GSL6TVS16A L616A 16 17.8 19.7 1 26 23.1 0.1 GSL6TVS17A L617A 17 18.9 20.9 1 27.6 21.7 0.1 GSL6TVS18A L618A 18 20 22.1 1 29.2 20.5 0.1 GSL6TVS20A L620A 20 22.2 24.5 1 32.4 18.5 0.1 GSL6TVS22A L622A 22 24.4 26.9 1 35.5 16.9 0.1 GSL6TVS24A L624A 24 26.7 29.5 1 38.9 15.4 0.1 GSL6TVS26A L626A 26 28.9 31.9 1 42.1 14.3 0.1 GSL6TVS28A L628A 28 31.1 34.4 1 45.4 13.2 0.1 GSL6TVS30A L630A 30 33.3 36.8 1 48.4 12.4 0.1 GSL6TVS33A L633A 33 36.7 40.6 1 53.3 11.3 0.1 GSL6TVS36A L636A 36 40 44.4 1 58.1 10.3 0.1 GSL6TVS40A L640A 40 44.4 49.1 1 64.5 9.3 0.1 GSL6TVS43A L643A 43 47.8 52.8 1 69.4 8.6 0.1 GSL6TVS45A L645A 45 50 55.3 1 72.7 8.3 0.1 GSL6TVS48A L648A 48 53.3 58.9 1 77.4 7.8 0.1 GSL6TVS51A L651A 51 56.7 62.7 1 82.4 7.3 0.1 GSL6TVS54A L654A 54 60 66.3 1 87.1 6.9 0.1 GSL6TVS58A L658A 58 64.4 71.2 1 93 6.4 0.1 GSL6TVS60A L660A 60 66.7 73.7 1 96 6.2 0.1 GSL6TVS64A L664A 64 71.1 78.6 1 103 5.8 0.1 GSL6TVS70A L670A 70 77.8 96 1 113 5.3 0.1 GSL6TVS75A L675A 75 83.3 92.1 1 121 5 0.1 GSL6TVS78A L678A 78 86.7 95.8 1 126 4.8 0.1 GSL6TVS85A L685A 85 94.4 104 1 137 4.4 0.1 GSL6TVS90A L690A 90 100 111 1 146 4.1 0.1 GSL6TVS100A L6100A 100 111 123 1 162 3.7 0.1 GSL6TVS110A L6110A 110 122 135 1 177 3.4 0.1 GSL6TVS120A L6120A 120 133 147 1 193 3.1 0.1 GSL6TVS130A L6130A 130 144 159 1 209 2.9 0.1 GSL6TVS150A L6150A 150 167 185 1 243 2.5 0.1 GSL6TVS160A L6160A 160 178 197 1 259 2.3 0.1 GSL6TVS170A L6170A 170 189 209 1 275 2.2 0.1 GSL6TVS180A L6180A 180 209 222 1 292 2.1 0.1 2/4 GSL6TVS10A thru GSL6TVS180A Surface Mount Transient Voltage Suppressors Peak Pulse Power 600W Stand-off Voltage10V to 180V Ratings and Characteristics Curves (TA = 25°C unless otherwise noted) 3/4 GSL6TVS10A thru GSL6TVS180A Surface Mount Transient Voltage Suppressors Peak Pulse Power 600W Stand-off Voltage10V to 180V Package Outline Dimensions  (in millimeters) eSGB (SMAF) DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 1 25 1.25 1 45 1.45 0 049 0.049 0 057 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering  footprint www.goodarksemi.com 4/4 Doc.USGSL6TVSxSD2.0 Oct.2018