HER2005

HER2001 thru HER2007 Reverse Voltage 50 to 1000 Volts High Efficient Rectifiers Forward Current 2.0 Amperes Features Low cost Diffused junction Ultra fast switching for high efficiency Low reverse leakage current Low forward voltage drop High current capability The plastic material carries UL recognition 94V-0 TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case : JEDEC DO-204AC(DO-15) molded plastic Polarity : Color band denotes cathode Weight : 0.014 ounce, 0.39 gram Mounting position : Any Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @TA=55oC Symbols VRRM VRMS V DC I(AV) IFSM VF @ TJ=25oC @ TJ=100oC IR trr CJ RθJA TJ TSTG 50 50 25 -55 to +125 -55 to +150 1.0 H ER 2001 50 35 50 H ER 2002 100 70 100 H ER 2003 200 140 200 H ER 2004 400 280 400 2.0 H ER 2005 600 420 600 H ER 2006 800 560 800 H ER 2007 1000 700 1000 Units Volts Volts Volts Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum forward voltage at 2.0A DC Maximum DC reverse current at rated DC blocking voltage 60.0 1.3 5.0 100 75 30 1.7 Amps Volts uA uA nS pF o Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range C/W o C C o Notes: 1. Measured with IF=0.5A,IR=1A,IRR=0.25A. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance Junction to Ambient. 213 RATINGS AND CHARACTERISTIC CURVES 214