MB4S

MB2S thru MB10S Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Reverse Voltage 200 to 1000 Volts Forward Current 0.5 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junctions High surge overload rating: 35A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260oC/10 seconds. Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.078 oz., 0.22 g Package outline dimensions in inches (millimeters) Maximum Ratings and Electrical Characteristics (TA=25oC unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current (see Fig.1) on glass-epoxy P.C.B. on aluminum substrate Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current at rated DC blocking voltage per leg Typical thermal resistance per leg Typical junction capacitance per leg at 4.0V, 1.0MHz Operating junction and storage temperature range TA = 25oC TA = 125oC Symbols VRRM VRMS V DC IF(AV) IFSM It VF IR RθJA RθJA RθJL CJ TJ, TSTG 2 MB2S 200 140 200 MB4S 400 280 400 MB6S 600 420 600 0.5 0.8 (1) (2) MB8S 800 560 800 MB10S 1000 700 1000 Units Volts Volts Volts Amp Amps A 2 se c Volt uA o 35.0 5.0 1.0 5.0 100 85 70 20 (1) (2) (1) C/W pF o 13 -55 to +150 C Notes: 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads 2. On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad 405 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 406