MF8S

MF2M thru MF10M / MF2S thru MF10S Miniature Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 200 to 1000 Volts Forward Current 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junctions High surge overload rating: 40A peak Saves space on printed circuit boards Recommended for non-automotive applications Mechanical Data Case: MFxM (MBM), MFxS (MBS) Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.078 oz., 0.22 g Maximum Ratings and Electrical Characteristics (TA=25oC unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current (see Fig.1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current at rated DC blocking voltage per leg Typical thermal resistance per leg Typical junction capacitance per leg (3) Symbols VRRM VRMS V DC IF(AV) IFSM I2t VF IR RθJA RθJA RθJL CJ TJ, TSTG MF2M MF2S 200 140 200 MF4M MF4S 400 280 400 MF6M MF6S 600 420 600 1.0 40.0 5.0 1.1 5.0 100 85 70 20 (1) (2) (1) MF8M MF8S 800 560 800 MF10M MF10S 1000 700 1000 Units Volts Volts Volts Amp Amps A 2 se c Volt uA o TA = 25oC TA = 125oC C/W pF o 13 -55 to +150 Operating junction and storage temperature range Notes: C 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads 2. On aluminum substrate P.C.B. with an area of 0.8 x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 420 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) Package outline dimensions in inches (millimeters) 421