MUR120

MUR120 Reverse Voltage 200 Volts Ultrafast Plastic Rectifier Forward Current 1.0 Ampere Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode Ultrafast recovery time for high efficiency Excellent high temperature switching Glass passivated junction Mechanical Data Cases: JEDEC DO-204AC(DO-15), molded plastic body over passivated chip Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250oC/10Seconds, 0.375” (9.5mm) lead length at 5 lbs. (2.3Kg) tension Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TA=130 C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage (Note 1) at 1.0A, TJ=25oC 1.0A, TJ=150oC TJ=25oC TJ=150oC o Symbols VRRM VRWM V DC IF(AV) IFSM VF IR trr trr tf r RθJA TJ, TSTG MUR120 200 200 200 1.0 35.0 0.875 0.710 2.0 50 25 35 25 27 -55 to +175 Units Volts Volts Volts Amp Amps Volts uA uA nS nS nS o Maximum instantaneous reverse current at rated DC blocking voltage (Note 1) Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Maximum reverse recovery time at IF=1.0A, di/dt=50A/us, VR=30V, Irr=10% IRM Maximum forward recovery time at IF=1.0A, di/dt=100A/us, Irec to 1.0V Typical thermal resistance junction to ambient (Note 2) Operating junction and storage temperature range Notes: C/W o C 1. Pulse test: tp=300us, duty cycle < 2% 2. Lead length = 3/8” on P.C. Board with 1.5” x 1.5” copper surface 229 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 230