P300G

P300A thru P300M General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 3.0 Amperes Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High surge current capability Typical IR less than 0.1uA Construction utilizes void-free molded plastic technique 3.0 Amperes operation at TA=90oC with no thermal runaway High temperature soldering guaranteed: 250oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: JEDEC DO-201AD, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55oC Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range TA=25oC TA=100oC Symbols VRRM VRMS V DC IF(AV) IFSM VF IR trr CJ RθJA RθJL TJ TSTG P 300A 50 35 50 P 300B 100 70 100 P 300D 200 140 200 P 300G 400 280 400 3.0 P 300J 600 420 600 P 300K 800 560 800 P 300M 1000 700 1000 Units Volts Volts Volts Amps 200.0 1.2 5.0 25 1.0 30 20.0 5.0 -55 to +125 -55 to +150 Amps Volts uA us pF o C/W o C C o Notes: 1. Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.8" x 0.8" (20 x 20mm) copper heatsinks 65 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 66