GETG0105

Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: info@gpsemi.it GETG0105 PHASE CONTROLLED SCR Plastic case DC power supply AC drives VOLTAGE UP TO AVERAGE CURRENT SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic VRRM VRSM VDRM IDRM IRRM Repetitive peak reverse voltage Non-repetitive peak reverse voltage Repetitive peak off-state voltage Repetitive peak off-state current, max. Repetitive peak reverse current, max. VDRM, single phase, half wave, Tj = Tjmax VRRM, single phase, half wave, Tj = Tjmax 600 V 1050 A 15 kA Conditions Value 600 V 700 V 600 V 50 mA 50 mA ON-STATE CHARACTERISTICS IT(AV) IT(RMS) ITSM I²t VT(TO) Average on-state current R.M.S. on-state current Surge on-state current I² t for fusing coordination Threshold voltage On-state slope resistance Peak on-state voltage, max Holding current, max Latching current, typ Tj = Tjmax Tj = Tjmax On-state current IT = 2900 A , Tj = Tjmax Tj = 25 °C Tj = 25 °C Sine wave,180° conduction, Th = 55 °C Sine wave,180° conduction, Th = 55 °C Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 1050 A 1649 A 15 kA 1125 kA²s 0,87 V 0,238 mΩ 1,56 V 600 mA 1000 mA rT VTM IH IL TRIGGERING CHARACTERISTICS VGT IGT VGD PGM PG(AV) IFGM VFGM VRGM Gate trigger voltage Gate trigger current Non-trigger voltage Peak gate power dissipation Average gate power dissipation Peak gate current Peak gate voltage (forward) Peak gate voltage (reverse) Tj = 25 °C, VD = 5 V Tj = 25 °C, VD = 5 V VD = 67% VRRM, Tj = Tjmax Pulse width 0.5 ms 2,5 V 190 mA 0,25 V 10 W 2W 3A 20 V 5V SWITCHING CHARACTERISTICS di/dt dV/dt tq Critical rate of rise of on-state current Critical rate of rise of off-state voltage Turn-off time, typ Tj = Tjmax - non repetitive Tj = Tjmax Tj = Tjmax, IT = 320 A, di/dt = -12.5 A/µs VR = 100 V, VD = 67% VDRM, dV/dt = 20 V/µs 200 A/µs 500 V/µs µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Rth(c-h) Tjmax Tstg F Thermal resistance (junction to case) Thermal resistance (case to heatsink) Max operating junction temperature Storage temperature Clamping force ± 10% Mass Double side cooled Double side cooled 0,034 °C/W 0,010 °C/W 125 °C -30 / 125 °C 9,0 kN 75 g Document GETG0105T001 PHASE CONTROLLED SCR GETG0105 Current rating - sine wave 130 Heatsink temperature [°C] 120 110 90 80 70 60 50 0 200 400 600 IT [ A] 800 1000 1200 30° 60° 90° 120° 180° Power loss - sine wave 1800 1600 1400 1200 1000 800 600 400 200 0 0 200 180° 120° 60° 30° 90° PF [W] 100 400 600 IT[A] 800 1000 1200 Maximum surge current d .s. cooled 16 14 12 ITSM [ A] 8 6 4 2 0 1 10 Number of cycle current pulses [n] 100 0 0 ITT[[ A] I A] 10 2500 2500 2000 2000 1500 1500 1000 500 On-state voltage drop Tj =Tjma Tj =Tjma 0,5 VT [ V] 1 1,5 Thermal impedance (j-c) 0,04 0,035 0,03 ZTH(j-c) [°C / W] 0,025 0,02 0,015 0,01 0,005 0 0,001 0,01 0,1 1 10 100 Time [s] dimensions mm In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GETG0105T001