GSCB6-C

Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: info@gpsemi.it GSCB6-C RS485 & CANBUS communication interface board. Full galvanic insulation Protection against communication channel shorts Compact dimensions Plastic case with transparent cover High reliability connectors The GSCB6-C communication board extends the capabilities of the GSCB6 SCR Firing Board by providing the following functions: - Connection to the RS422/RS485 balanced transmission lines as specified by the following ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A. - Connection to the CAN (Controller Area Network) as specified by the ISO 11898 Standard. - Galvanic isolation is provided between the transmission lines and SCR Firing Board by using optocouplers. Additional features: CAN Bus connection – Onboard 120 Ω termination is provided which can be enabled/disabled with a jumper. RS422/RS485 – On board 120 Ω termination is provided which can be enabled/disabled with a jumper; – Failsafe protection for open/short line conditions. MAXIMUM RATINGS Parameter VAC (RMS) VINS (RMS) TA TS Maximum RMS mains voltage Description Conditions Sine waveform T = 1min Value 400 V 2500 V Insulation voltage between mains and control sections Operating temperature Storage temperature -10 to 55 °C -65 to 65 °C ELECTRICAL CHARACTERISTICS Parameter Description PS PSUP Power supply Power consumption Conditions Value 230 VAC 5W MECHANICAL CHARACTERISTICS Parameter W D H M Width Depth Height Mass Description Conditions Value 95 mm 100 mm 125 mm 300 g RS485 & CANBUS communication GSCB6-C 96 97,7 Document GSCB6-CT002 125,2