76HPSB04GWR

Surface Mount DIP Switches FEATURES • Compatible with SMT Assembly Including Infrared Reflow and Vapor-Phase • Easily Accessed when PC Boards are Racked • Reliable Spring and Ball Contact SERIES 76HP Side Actuated PIANO-DIP In inches (and millimeters) LENGTH ± .010 (0,25 SEE ORDER INFO .023 .055 ± .010 (5,84) (1,40 ± 0,25) REF. .305 ± .010 (7,75 ± 0,25) Recommended PC Pad Dimensions .380 ± .010 (9,65 ± 0,25) .025 (0,64) R. C CL L .100 ± .005 (2,54 ± 0,13) TYP. CIRCUITRY .424 ± .015 (10,77 ± 0,38) TYP. Environmental Ratings SPECIFICATIONS Electrical Ratings Make-and-break Current Rating: 10,000 operations per switch position at 1 mA, 5 Vdc; 50 mA, 30 Vdc; or 150 mA, 30 Vdc Contact Resistance: Initial: 30 mohms maximum; After Life: 100 mohms maximum (10 mA at 50 Vdc, open circuit) Insulation Resistance: Minimum, at 100 Vdc between adjacent closed contacts and also across open switch contacts. Initial: 2,000 Mohms Dielectric Strength: Minimum voltage (AC RMS) measured between adjacent closed contacts and also across open switch contacts. Initial: 750 volts; After Life: 500 volts Carry Rating: 5 amps, maximum rise of 20°C Switch Capacitance: 2 pF at 1 megahertz Meets all requirements of MIL- S-83504. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Operating Temperature Range: -40°C to + 85°C Storage Temperature Range: -55°C to + 85°C Moisture Resistance: Per specification, Method 106 Solderability: Per MIL-STD-202, Method 208 Tested to EIA Standard RS-448-2. Resistance to Soldering Heat: Per MIL-S83504, six second test Recommended Processing Temperature: 220°C–230°C (1 pass—260°C maximum) Processing Position: Switch is to be processed with all actuators in the closed (on) position as shipped. TAPE AND REEL PACKAGING Meets requirements of EIA 481-2 or EIA 481-3 13 INCH DIAMETER REEL 16 & 24mm TAPE 76HPSB 08GW XXXX OPEN OPEN 76HPSB08GW XXXX * For other lengths, contact Grayhill, Inc. Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. XXXX 76HPSB02GWR 76HPSB04GWR 76HPSB06GWR 76HPSB08GWR 76HPSB10GWR OPEN Part Number 76HPSB08GW (500 switches per reel) 76HPSB 08GW XXXX OPEN 24 mm 24 mm 32 mm 44 mm 44 mm DIRECTION OF FEED XXXX Carrier Width Dim. A CONDUCTIVE PLASTIC EMBOSSED TAPE OPEN ORDERING INFORMATION: Tape and Reel Packaging 7,1 mm 12,2 mm 17,3 mm 22,4 mm 27,4 mm over nickel barrier. Terminals: Copper alloy, solder plated over nickel barrier. Non-Conductive Parts: Cover is natural color thermoplastic, actuators are white thermoplastic (UL94V-O) Tape Seal: Provided without tape seal. Contact Grayhill if tape seal is required. 76HPSB08GW Shorting Member: Brass, gold-plated over nickel barrier. Base Contacts: Copper alloy, gold-plated, 0.280" 0.480" 0.680" 0.880" 1.080" CL CL 76HPSB 08GW XXXX OPEN Mechanical Life: 20,000 operations per switch position Vibration Resistance: Per Method 204, Test Condition B. 1 mS opening (10 mS allowed) 2 4 6 8 10 .070 (1,78) TYP. .100 (2,54) TYP. 16mm Materials and Finishes Length (metric) .280 (7,11) TYP. Soldering Information Mechanical Ratings Length (inches) .530 (13,46) TYP. .303 ± .015 (7,70 ± 0,38) .012 ± .001 (0,30 ± 0,03) TYP. Mechanical Shock: Per Method 213, Test Condition A. 1 mS opening (10 mS allowed) Thermal Shock Resistance: Per specification; no failures; passes contact resistance Terminal Strength: Per specification Thermal Aging: 1,000 hours at 85°C; no failures As viewed from the top of the switch in the positions shown in the drawing. No. of Positions* DIP Switches DIMENSIONS  16mm PIN ONE LOCATION 32, 44 & 56mm TAPE COVER TAPE DIM. A (SEE ORDER INFO.) Each reel has a 15.750 inch (390 mm) minimum leader and a 6.30 inch (160 mm) minimum trailer. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com B-8