HB16CKW01-5C-CB

Illuminated Switches Illuminated Subminiature Pushbutton Switches M8P0.75 (1.0) x (2.0)Typ .039 x .079 (0.3) Typ .012 (1.8) .071 (5.0) .197 (7.0) .276 HB Series L(+) L(-) NO NC COM 2 3 1 (2.54) Typ .100 (7.4) Sq .291 (9.0) Sq .354 (1.3) .051 (3.5) .138 (0.5) (5.0) .020 .197 (10.0) .394 (15.5) (5.3) .610 .209 Latchdown Position (2.54) Typ .100 HB15SKW01-5C-CB M8P0.75 (1.0) x (2.0)Typ .039 x .079 (0.3) Typ .012 (1.8) .071 L(+) L(-) NO NC COM 2 3 1 (2.54) Typ .100 (7.4) Dia .291 (9.0) Dia .354 (1.3) .051 (3.5) .138 (5.0) (0.5) .197 .020 (10.0) .394 (5.3) (15.5) .209 .610 Latchdown Position (5.0) .197 (7.0) .276 (2.54) Typ .100 HB16CKW01-5C-CB CUTAWAY POLE & CIRCUITS Plunger Position Normal Down Connected Terminals Normal Down Throw & Switch/Lamp Schematics Pole Model Notes: Switch is marked withNO, NC, C, L. LED circuit is isolated and requires an external power source. 1 COM SP HB15 HB16* ON ON (ON) ON 1-3 1-2 SPDT 3 NC 2 NO (+) (-) When in latchdown position for the alternate circuit, cap positions above the housing are: 1.5mm for snap-in models & 7.0mm for PCB models. How to order: 1 2 3 4 5 6 7 General Specifications: ELECTRICAL CAPACITY (Resistive Load) » Power Level (code W): 0.1A max.@ 30V AC/DC HB 1 1 2 POLE: SPDT CIRCUITS: ON-(ON) ON-ON (Alternate Action with Latchdown) SHAPES: Square Round HOUSING: Black CONTACTS & TERMINALS: Silver Contacts and Solder Lug Terminals 0.1A @ 30V AC/DC LED: Without LED (Non-Illuminated) Bright LED Red Bright LED Amber Bright LED Green Super Bright LED White Super Bright LED Green Super Bright LED Blue 7 CAP TYPES & COLORS: For Non-Illumination: Black (Square Only) White Red Yellow Green Blue For Bright LED (Lens/Diffuser): Black Cap/White Window for Spot Illuminaterd (Square Only) Red/White Amber/White Green/White Clear/White For Super Bright LED (Lens/Diffuser): Clear/White OTHER RATINGS: » Contact Resistance: 50m max. min.@500VDC » Insulation Resistance: 100M 5 6 3 S C 4 A B C E F G AB CB DB FB JB » Mechanical Life: 100,000 operations min. » Electrical Life: 50,000 operations min. » Norminal Operating Force: 3.43N » Contact Timing: Nonshorting (Break-before-make) » Travel: Pretravel: 2.2mm; Overtravel: 0.8mm; Total: 3.0mm MATERIALS » Movable Contacts & Stationary Contacts: Phosphor bronze with silver plating » Terminals: Phosphor bronze with silver plating » Lamp Terminals: Phosphor bronze with silver plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +50°C SOLDERING » Manual Soldering: 4 seconds max. @ 390°C max. K 5 W01 6 No code 5C 5D 5F 6B 6F 6G JB 1 sales@greatecs.com www.greatecs.com Illuminated Switches Illuminated Subminiature Pushbutton Switches SHAPES & PANEL CUTOUT S 9mm, Square The bezel is an integral part of the switch body. HB Series C 9mm Round Recommemded Panel Thickness: 0.5 ~ 5.0 mm. Socket wrench AT110 may be used for mounting. Overtightening the mounting nut AT073 may damage the switch housing. (8.0) Dia .315 CAPS FOR NON-ILLUMINATED SWITCHES AT4035 (7.4) Sq .291 (4.5) .177 (4.8) .189 (4.8) .189 CAPS FOR BRIGHT LEDs AT4052 Spot Illuminated (7.4) Sq .291 (4.6) .181 AT4036 (7.4) Dia .291 (4.5) .177 AT4166 (7.4) Sq .291 AT4167 (7.4) Dia .291 (4.5) .177 (4.8) .189 Transparent Colored Lens (1.8) .071 (1.2) .047 (3.0) .118 (4.5) .177 (4.8) .189 Translucent White Diffuser (4.8) .189 Colored LED CAPS FOR BRIGHT & SUPER BRIGHT LEDs AT4031 (7.4) Sq .291 (4.5) .177 (4.8) .189 (4.8) .189 TERMINALS W01 Solder Lug (5.0) .197 (2.0) .079 (1.0) .039 (1.8) .071 AT4032 (7.4) Dia .291 (4.5) .177 The 1.0x2.0mm oblong hole accommodates one solid or one stranded 20-gauge wire or two 22gauge wires. Solder lug terminals are spaced 2.54x5.08mm. This enables PCB mounting which can be accommplished by elongating PC board hole to 2.03mm. Thk = (0.3) .012 LED COLORS & SPECIFICATIONS Bright Bright AT633 (+) (-) Super Bright 5F Green 25 20 2.2 5 0.38 6B White 30 20 3.6 5 0.50 6F Green 30 20 3.5 5 0.50 6G Blue 30 20 3.6 5 0.50 Unit mA mA V V mA/°C °C 5C Red IFM IF VF VRM IF 30 20 1.85 5 0.40 5D Amber 30 20 2.0 5 0.42 Super Bright AT624G (Blue) AT629B (White) AT630F (Green) T-1 Bi-pin Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25°C Ambient Temperature Range -25 ~ +50 The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Single element LED is colored in OFF state. If the source voltage exceeds the rated voltage, a ballast resistor is required. ASSEMBLY INSTRUCTIONS Cap Removal LED Polarity & Orienation in Lamp Socket D Flat Black Dot (+) (–) Top View of Switch Anode (+) Cathode (–) (+) (–) Cap Replacement AT624 AT629 AT630 AT633 AT111 Lamping Tool AT110 Socket Wrench Lamping Tool AT111 may be used to remove and replace LED. Socket Wrench AT110 may be used to tighten the mounting nut. 2 sales@greatecs.com www.greatecs.com