Illuminated Switches
Standard Size Snap-in Pushbuttons
Square
(1.8) .071 (1.2) x (2.0)Typ .047 x .079 (0.5) Typ .020
NC NO 3 L (+) 6
LB Series
(13.2) Sq .520
(2.54) Typ .100 (1.0) .039
2
5
(15.8) Sq .622
COM
1 L (-)
4
(17.8) Sq .701
(3.2) .126
(21.5) .846 Latchdown Position
(7.5) .295
(2.8) Typ .110 (5.08) Typ .200
LB15SKW01-12-CJ
Round
(1.8) .071
Single pole models do not have terminals 4, 5, & 6.
(1.2) x (2.0)Typ .047 x .079 (0.5) Typ .020
NC NO
3
L (+)
6
2
5
(15.8) Sq .622 (21.7) Dia .854
(2.54) Typ .100 (19.0) Dia .748 (23.7) Dia .933 (1.0) .039 (3.2) .126 (21.5) .846 Latchdown Position (7.5) .295
COM
1 L (-)
4
(2.8) Typ .110 (5.08) Typ .200
LB16CKW01-12-CJ
Rectangular
Single pole models do not have terminals 4, 5, & 6.
(1.2) x (2.0)Typ .047 x .079 (0.5) Typ .020
NC NO 3 L (+) 6
(1.8) .071
(13.2) .520 (17.8) .701
2
5
(15.8) .622
(2.54) Typ .100 (19.4) .764 (1.0) .039 (24.0) .945 (3.2) .126 (22.5) .886 Latchdown Position (7.5) .295
COM
1 L (-)
4
(5.08) Typ .200 (22.0) .866
(2.8) Typ .110
LB26RGW01-12-CJ
Single pole models do not have terminals 4, 5, & 6.
How to order:
1 2 3 4 5 6 7
LB
1
1 2
2
POLES: SPDT DPDT CIRCUITS: ON-(ON) ON-ON (Alternate Action with Latchdown) SHAPES: Square Round Rectangular HOUSING: Black Gray
LAMPS: Type1: Incandescent Lamp used with Solid Cap 5-volt 05 12 12-volt
Type2: Incandescent or Neon used w / Insert Cap 110-volt Neon 01 5-volt Incandescent 05 12 12-volt Incandescent Type 3: Bright LED used with LED Cap No Resistor 5-volt Red Amber Green
5C 5D 5F 5C05 5D05 5F05
6
5 6
3
7 CAPS TYPES & COLORS: Solid Cap: Lens/Filter Colors (only for type 1 lamp) BJ White/Clear Red/Clear CJ Yellow/Clear EJ Green/Clear FJ Blue/Clear GJ
S C R
4
12-volt 24-volt
5C12 5D12 5F12 5C24 5D24 5F24
K G
5
Insert Cap: Lens/Filter Colors (only for type 2 lamp) Clear/White JB Clear/Red JC Clear/Yellow JE *JF Clear/Green * Clear/Blue JG * JF & JG not suitable with neon. LED Cap: Lens/Diffuser Colors (only for type 3 lamp) Clear/White JB Clear/Red JC Clear/Amber JD JF Clear/Green LED Cap: Lens/Diffuser Colors (only for type 4 lamp) Clear/White JB Spot Illuminated Cap Colors (only for type 5 lamp) Available in square and round only. A Black White B C Red F Green
CONTACTS & TERMINALS: W01 Silver Contacts Rated 3A @ 125/250V AC Solder Lug / Quick Connect G01 Gold Contacts Rated 0.4VA @ 28V AC/DC Solder Lug / Quick Connect
Type 4: Super Bright LED used with LED Cap White 6B 6F Green Blue 6G Type 5: LED in Spot Illuminated Cap Red Single Color 1C 1D Amber Single Color 1F Green Single Color CF Red/Green Bicolor
sales@greatecs.com
www.greatecs.com
Illuminated Switches
1
Illuminated Switches
Standard Size Snap-in Pushbuttons
LB Series
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): Logic Level (gold): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum for silver; 100 milliohms maximum for gold 200 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 1,000,000 operations minimum for momentary circuit 200,000 operations minimum for maintained circuit 100,000 operations minimum 4.41N Nonshorting (break-before-make) Momentary: Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm) Maintained: Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm) Glass fiber reinforced polyamide (UL94V-0) Stainless steel Silver alloy or copper with gold plating Silver alloy or copper with gold plating Liquid crystal polymer (UL94V-0) Phosphor bronze with silver or gold plating Brass with silver plating –25°C through +50°C (–13°F through +122°F) Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s 2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Not available for snap-in; see next section for panel seal. 3.92N maximum downward force on cap 52.95N maximum downward force on connector Manual Soldering: See Profile A in Supplement section. UL94V-0 housing & base All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. All models certified at 3A @125V or 250V AC or 0.4VA @ 28V AC/DC maximum; CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel:
Materials & Finishes
Housing: Snap-in Frame: Movable Contact: Stationary Contacts: Base: Switch Terminals: Lamp Terminals:
Environmental Data
Operating Temp Range:
Humidity: Vibration:
Shock: Sealing:
Installation
Cap Installation Force: Quick Connect Force: Soldering Time & Temperature:
Standards & Certifications
Flammability Standards: UL & C-UL Recognized:
R
CSA Certified:
sales@greatecs.com
www.greatecs.com
Illuminated Switches
2
Illuminated Switches
Standard Size Snap-in Pushbuttons
LB Series
POLE & CIRCUIT
Plunger Position ( ) = Momentary Normal Pole SP Model LB15 * LB16 LB25 * LB26 ON ON ON ON (ON) ON (ON) ON 1-3 1-2 Down Connected Terminals Normal Down Throw & Switch/Lamp Schematics Notes: Switch is marked with NC, NO, COM, L+, L–. Lamp circuit is isolated and requires external power source.
1 COM
CUTAWAY
SPDT
3 1 COM NO 6 NC 2 NO 4 NC COM
L (+)
(-) L
DP
1-3 4-6
1-2 4-5
DPDT
3 NC 2 5 NO
L (+)
(-) L
* When in latchdown position for the alternate circuit, cap position is .039” (1.0mm) above the built-in bezel.
SHAPES & PANEL CUTOUTS
S
(22.0) Dia .866
(16.2) .638 (11.5) .453 (16.2) Sq .638 (1.5)R .059 (22.4) .882
Cutout for 1 switch: .638” x .638” (16.2mm x 16.2mm) Cutout for 1 switch with barriers: .638” x .815” (16.2mm x 20.7mm)
Cutout for 1 switch: .638” x .882” (16.2mm x 22.4mm) Cutout for 1 switch with barriers: .638” x 1.059” (16.2mm x 26.9mm)
Panel Thickness for Switches & Barriers: .039” ~ .157” (1.0 ~ 4.0mm) Panel Thickness for Protective Guards & Splash Covers: .039” ~ .138” (1.0 ~ 3.5mm)
INCANDESCENT & NEON LAMP CODES & SPECIFICATIONS
AT607 & AT607N
AT607 Incandescent 5-volt or 12-volt; AT607N Neon 110-volt
05
V I 5V AC 115mA 7,000
12
12V AC 60mA
01 *
110V AC 1.5mA 10,000
Voltage Current Endurance
T-1 Bi-pin
determined at a basic temperature of 25°C. Lamp circuit is isolated and requires external power source.
Avg. Hours
*
Ambient Temp. Range
–25°C ~ +50°C
Recommended Resistors for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC
sales@greatecs.com
www.greatecs.com
Illuminated Switches
.622” (15.8mm) Square
C
.854” (21.7mm) Round
R
.622” x .866” (15.8mm x 22.0mm) Rectangular
3
Illuminated Switches
Standard Size Snap-in Pushbuttons
SHAPES & PANEL CUTOUTS
LB Series
The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Polarity marks are on the switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Additional lamp detail is shown in the Accessories & Hardware section. Bright LED without Resistor AT635 LEDs are colored in OFF state. Color Codes Red Amber Green
No Code
Red 30mA 20mA 1.9V 5V
No Resistor Green 30mA 20mA 2.1V 5V
5C
5D
5F
IFM IF VF V RM ΔI F
Amber 30mA 20mA 2.0V 5V 0.42mA/°C –25° ~ +50°C
Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage
(+)
(-)
Current Reduction Rate Above 25°C Ambient Temperature Range Bright LED with Resistor
T-1 ⁄ 2 Bi-pin
1
AT627 with Resistor Color Codes:
Red
Amber
Green
Resistor Codes
5C
5D
5F
IFM IF VF V RM ΔI F
05
— 52mA 5V 4V
12
— 26mA 12V 8V 0.50mA/°C –25° ~ +50°C
24
— 13mA 24V 16V
Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25°C
T-1 Bi-pin
Ambient Temperature Range
AT627 5-volt 4-element with Resistor
(+)
(-)
AT627 12-volt 4-element (+) with Resistor
(-)
AT627 24-volt (+) 4-element with Resistor
(-)
Super Bright Single Element LED AT625G Blue AT631B White AT632F Green
Attention
Electrostatic Sensitive Devices
6B
Color IFM IF VF V RM ΔI F White 30mA 20mA 3.6V 5V
6F
Green 30mA 20mA 3.5V 5V 0.50mA/°C –25° ~ +50°C
6G
Blue 30mA 20mA 3.6V 5V
Forward Peak Current Continuous Forward Current Forward Voltage
(+) (-)
Reverse Peak Voltage Current Reduction Rate Above 25°C
T-1 Bi-pin
Ambient Temperature Range
sales@greatecs.com
www.greatecs.com
Illuminated Switches
4
Illuminated Switches
Standard Size Snap-in Pushbuttons
CAP TYPES & COLOR COMBINATIONS
LB Series
Color Codes:
B White
C Red
D Amber
E Yellow
F Green
G Blue
J Clear
Solid Cap for Incandescent Lamp Lens/Filter Colors Available: AT476 Square
(13.2) Sq .520 (3.5) .138 (19.0) Dia .748
AT4012 Round
(4.5) .177 (5.5) .217 (13.2) .520
AT4026 Rectangular
(19.4) .764 (5.0) .197 (6.0) .236
Translucent Colored Lens
BJ CJ EJ
FJ GJ
(6.5) .256
Transparent Clear Filter
Material: Polycarbonate
Finish: Glossy
Lamp AT607
Insert Cap for Incandescent or Neon Lamp Lens/Filter Colors Available: AT477 Square
(13.2) Sq .520 (3.5) .138 (19.0) Dia .748
AT4013 Round
(4.5) .177 (5.5) .217 (13.2) .520
AT4027 Rectangular
(19.4) .764 (5.0) .197 (6.0) .236
JB JC JE
JF JG
(6.5) .256
Translucent Colored Filter
JF and JG not suitable with neon lamp.
Material: Polycarbonate
Finish: Glossy
Lamp AT607 or 607N
Cap for Bright LED without Resistor Lens/Diffuser Colors Available: AT4176 Square
(13.2) Sq .520 (3.5) .138 (6.5) .256
AT4178 Round
(19.0) Dia .748
AT4177 Rectangular Transparent Clear Lens
(4.5) .177
JB JC JD JF
(5.5) .217
Translucent Colored Diffuser Bright LED AT635
Material: Polycarbonate
Finish: Glossy
Cap for Bright LED with Resistor Lens/Diffuser Colors Available: AT4162 Square
(13.2) Sq .520 (3.5) .138 (19.0) Dia .748
AT4164 Round
(4.5) .177 (13.2) .520
AT4163 Rectangular Transparent Clear Lens
(19.4) .764
JB JC JD JF
(6.5) .256
(5.5 .217
(5.0) .197 (6.0) .236
Translucent Colored Diffuser Bright LED AT627
Material: Polycarbonate
Finish: Glossy
sales@greatecs.com
www.greatecs.com
Illuminated Switches
Transparent Clear Lens
5
Illuminated Switches
Standard Size Snap-in Pushbuttons
CAP TYPES & COLOR COMBINATIONS
LB Series
Color Codes:
A Black
B White
C Red
D Amber
F Green
J Clear
Cap for Super Bright LEDs
JB
Clear Lens White Diffuser
AT4129 Square
(3.5) .138 (19.0) Dia .748
AT4128 Round
(4.5) .177 (5.5) .217 (13.2) .520
AT4130 Rectangular
(19.4) .764 (5.0) .197 (6.0) .236
Transparent Clear Lens
Material: Polycarbonate Finish: Glossy
(13.2) Sq .520
(6.5) .256
Translucent White Diffuser
Material: Polycarbonate
Finish: Glossy
LEDs AT625 AT631 AT632
Spot Illuminated Cap with LED The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Single color LEDs are colored in OFF state; bicolor LEDs are translucent white in OFF state. Polarity marks are on the switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Additional lamp detail is shown in the Accessories & Hardware section. LED Specifications Single Color LED with 1 Element LED factory assembled in Spot Illuminated Caps
(+) (-) (+)
Bicolor LED with 2 Elements
Single Color
Bicolor
1C
(-)
1D
Amber 30mA 24mA 2.0V 5V 0.40mA/°C
1F
Green 30mA 24mA 2.1V 5V 0.40mA/°C
CF
Red/Green 30/25mA 20mA 2.0/2.2V — 0.43/0.38mA/°C
Red Forward Peak Current Continuous Forward Current IFM IF VF V RM ΔI F 10mA 8mA 1.9V 5V 0.13mA/°C
Not Available Separately
Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25°C Ambient Temperature Range
–25° ~ +50°C
Cap Colors Available:
AT480 Square
(4.0) .157 (2.0) .079
(5.0) .197
AT4016 Round
A B C F
(13.2) Sq .520
(3.5) .138
(19.0) Dia .748
(5.0) .197
(4.5) .177 (5.5) .217
Cap with Window
(6.5) .256
(2.0) (6.0) .079 .236
Material: Polycarbonate
Finish: Glossy
Factory Assembled LED; Not Available Separately
When ordering spot illuminated cap separately, LED color must be specified. Examples: AT480CA (red LED, black cap); AT4016CFB (red/green bicolored LED, white cap)
sales@greatecs.com
www.greatecs.com
Illuminated Switches
6
Illuminated Switches
Standard Size Snap-in Pushbuttons
OPTIONAL ACCESSORIES
LB Series
Barriers AT497 End
End Position
AT498 Center
(4.3) Typ .169 (5.2) .205
(23.5) .925
Cutouts for More Than 1 Switch
(19.2) .756 A
(20.0) .787
(15.0) .591
(16.2) .638
Center Position
Material: Polyamide
(1.19) .047
(1.19) .047
(19.2) .756
Square A = .752” (19.1mm) x Number of Switches + .051” (1.3mm) Rectangular A = .996” (25.3mm) x Number of Switches + .051” (1.3mm)
Splash Covers AT499 Square Protective Guard Opens 90° Closes manually
(10.0) .394 (21.0) .827
(17.0) .669 (20.0) .787
Cap Height When Assembled (8.0) .315
(14.0) Sq .551 (17.9) Sq .705
Material: Polyamide
Protective Guards reduce depth of switch behind panel by .020” (0.5mm). Splash Covers
AT4171 Square Protective Guard Opens 180° Closes automatically
(10.5) .413 (20.5) .807
(17.9 .705 (7.1) .280
(18.4) .724
(20.4) .803
Cap Height When Assembled
(7.5) .295
(14.2) .559
(17.9) .705
(16.2) Sq .638 (39.0) Min* 1.535
AT4171 (10.5) .413 (20.5) .807
Materials : Cover: Clear Polycarbonate Base: Black GFR Polyamide Coil Spring: Stainless Steel
180°
(20.4) .803 (20.4) .803 (N) * Minimum dimension allows opening of cover to 180 °
(N) = Number of switches
Recommended Panel Thickness: .039” ~ .106” (1.0mm ~ 2.7mm)
sales@greatecs.com
www.greatecs.com
Illuminated Switches
7
Illuminated Switches
Standard Size Snap-in Pushbuttons
OPTIONAL ACCESSORIES
LB Series
Protective Guard AT4057 Rectangular Protective Guard Opens 90° Closes manually
Cap Height When Assembled (26.0) 1.024 (8.0) .315 (24.15) .951 (10.0) .394
(14.0) .551 (21.0) .827
Material: Polyamide
Protective Guards reduce depth of switch behind panel by .020” (0.5mm). Spring Loaded Protective Guard
AT4172 Rectangular Protective Guard
(10.5) .413 (20.5) .807 Cap Height When Assembled (17.9 .705
(22.4) .882
(16.2) .638
(24.6) .969
(26.6) 1.047
(7.5) .295
(20.4) .803
(24.1) .949
AT4172 (10.5) .413 (20.5) .807
(39.0) Min* 1.535
Opens 180° Closes automatically
180°
(26.6) 1.047 (N) = Number of switches
Materials: Cover: Clear Polycarbonate Base: Black GFR Polyamide Coil Spring: Stainless Steel
(26.6) 1.047 (N) * Minimum dimension allows opening of cover to 180 °
Recommended Panel Thickness: .039” ~ .106” (1.0mm ~ 2.7mm) Dust Covers
AT4002 Round
AT4001 Square
AT4011 Rectangular
(21.0) Dia .827
(15.0) Sq .591
(16.5) .650
(16.5) .650 (24.0) .945
Cap Height When Assembled (7.3) .287
Cap Height When Assembled (2.5) .098 (21.8) Dia .858 (30.0) Dia 1.181 (7.3) .287
(2.5) .098 (24.0) Sq .945
(22.7) .894 (30.2) 1.189
Materials: PVC with polyethylene gasket; PVC loses pliability below 0°C (32°F). Splash Covers reduce depth of switch behind panel by .020” (0.5mm).
sales@greatecs.com
www.greatecs.com
Illuminated Switches
(7.1) .280
8
Illuminated Switches
Standard Size Snap-in Pushbuttons
ASSEMBLY INSTRUCTIONS
LB Series
Lamp Installation & LED Orientation Incandescent & Neon Lamps AT607 & AT607N Align projections on lamp with grooves (B) in holder when inserting lamp. To correctly join the lamp holder and cap base, match the cut corners (A).
B
Bright LED AT627 Panel Seal Models Snap-in Models For panel seal models, inserted into the lamp socket which is built into the switch. The cap can then be placed on the switch. For snap-in models, Bright LED must be inserted into the cap (C) when inserting the LED.
Bright & Super Bright LEDs AT625, AT631, AT632, AT635 holder when inserting the LED. To correctly join the lamp holder and cap base, match the cut corners (A).
Attention
Electrostatic Sensitive Devices A
B
C
Switch & Cap Assembly
Cut Corner
C
Projection
.C .
K
5C -1 A B 25V AC 1V A0 3 25 A 3
Rubber Seal
N
C
Projection Notch
Square Match projection (C) on cap assembly with groove (C) inside switch. Lamp terminals will then be aligned correctly with lamp socket. Installation & Maintenance Snap-in Mount Panel Seal Bushing Mount
Bezel
Panel Seal With Lamps AT607, AT607N, and LEDs AT614, AT625, AT631, AT632: Match projection on cap assembly with notch inside switch. Lamp terminals will then be aligned correctly with lamp socket.
Lamp Replacement
O-ring
in place. To mount round switch, match the antirotation projection on switch with guide cut in panel. Snap into panel cutout.
Projection
Panel
Insert switch from the front of the panel with the o-ring between the built-in bezel and the panel. Install mounting nut AT075 (supplied with switch) from the rear of the panel. Overtightening mounting nut may damage the switch housing.
Panel Mounting Nut
Actuator must be in UP position. Pull off cap with cap extractor AT109. Replace lamp and reassemble as shown above.
AT109 Cap Extractor
AT112 Socket Wrench
sales@greatecs.com
www.greatecs.com
Illuminated Switches
Round & Rectangular Match clip on cap assembly with receptacle inside switch. Lamp terminals will then be aligned correctly with lamp socket.
N
S
L
N .O .
.C
.
5
A
LED B LED D Flat
9
Illuminated Switches
Standard Size Snap-in Pushbuttons
LEGENDS
LB Series
Gerneral information and basic soecifications are presented here for customers who want to do their own legends Suggested Printable Area for Lens Recommended Methods: Laser Etch on clear lens, Screen Print, or Pad Print on lens. Epoxy based ink is recommended.
(0.76) Typ .030
(11.68) (13.2) .460 .520
Suggested Printable Area for Film Insert Recommended Print Method: Screen Print with Epoxy based ink
Lens
Film Insert: Clear Polyester, 4 mil max. thickness
R = (0.6) .024
(0.76) Typ .030 (10.08) (11.6 .397 .457
Film Insert
(14.66) .577
Filter or Diffuser
(10.08) Sq .397 (11.6) Sq .457
(0.76) Typ .030
(15.88) Dia .625 (17.4) Dia .685
(0.76) Typ .030
(16.28) .641 (17.8) .701
(0.76) Typ .030
Shaded areas are printable areas.
Additional Methods
Additional methods for legends are engraving the lens and laser printing on film inserts. Maximum depth for engraving is .12“ (0.3mm) on the cap lens. Enamel paint is recommended to fill the engraved area.
sales@greatecs.com
www.greatecs.com
10
Illuminated Switches
ST AR T
(11.68) Sq .460 (13.2) Sq .520 (0.76) Typ .030 (17.48) Dia .688 (19.0) Dia .748 (0.76) Typ .030 (17.88) .704 (19.4) .764
(0.76) Typ .030
Shaded areas are printable areas.
ON
很抱歉,暂时无法提供与“LB15SKW01-12-CJ”相匹配的价格&库存,您可以联系我们找货
免费人工找货