Pushbutton Switches
Silent Pushbutton Switch with LED
“BOTTOM VIEW“
PB59 Series
PB59MTAA... A Type Actuator with A Type Cap
“BOTTOM VIEW“
PB59MTBB... B Type Actuator with B Type Cap
“BOTTOM VIEW“
PB59MTBC... B Type Actuator with C Type Cap
SCHEMATIC
P.C.B LAYOUT
How to order:
1 2 3 4 5 6 7 8
PB59
1 OPERATION: M Momentary 2 5
T N
3
ACTUATION: Tactile Actuation Non-Tactile Actuation ACTUATOR & CAP: A Type Actuator (only for Cap A) B Type Actuator (only for Cap B & C) CAP TYPE: 12mm Square Cap 15mm Square Cap 17.4mm Square Cap
N G F C B E PF
6
COLOR LED 1 (L1 CHIP): Without LED Ultra Blue Ultra Green Ultra Red Ultra White Ultra Yellow Pure Green COLOR LED 2 (L2 CHIP): Without LED Ultra Blue Ultra Green Ultra Red Ultra White Ultra Yellow Pure Green
7
B C F G E BB
8
DIFFUSER PLATE COLOR: White (Std.) Red Green Blue Yellow White (when indicate the cap color) CAP COLOR: Transparent (Std.) Red Green Blue Yellow Transparent (when indicate the diffuser color)
A B
4
A B C
N G F C B E PF
J C F G E JJ
sales@greatecs.com
www.greatecs.com
1
Pushbutton Switches
Silent Pushbutton Switch with LED PB59 Series
SPECIFICATIONS
ITEM 5-1 CONTACT RESISTANCE 5-2 INSULATION RESISTANCE 5-3 DIELECTRIC STRENGTH
TEST CONDITIONS DC 1.5V 100 mA BY METHOD OF VOLTAGE DROP DC 500V 200 m 100 M
CRITERIA MAX. MIN.
AC 500V(50-60HZ) FOR 1 MINUTE
BREAKDOWN IS NOT ALLOWABLE
6. MECHANICAL PERFORMANCE ITEM 6-1 OPERATING FORCE 6.2 TRAVEL TEST CONDITIONS ALONG THE DIRECTION TO APPLY A STATIC LOAD AT END OF ACTUATOR 4.5 0.2mm 250 CRITERIA 100gf
6-3 SOLDERABILITY 260 5
IN 3 SECONDS
SOLDER COVERAGE 75% MIN.
7.
SOLDERING HEAT RESISTANCE 7.1. MANUAL: 300 5 IN 3 SECONDS IN 3 SECONDS
www.greatecs.com 2
7.2. WAVE SOLDERING: 260 5
sales@greatecs.com
Pushbutton Switches
Silent Pushbutton Switch with LED
8. DURABILITY 8.1. OPERATING LIFE WITHOUT LOAD 1,000,000 MIN. 8.2. OPERATING LIFE WITH LOAD 200,000 MIN. 8.3. SPECIFICATIONS 8.3.1. 8.3.2. 8.3.3. 8.3.4.
PB59 Series
9.
ENVIRONMENTAL PERFORMANCE ITEM TEST CONDITIONS -20 2 FOR 96 HOURS 2. CRITERIA 1. IT SHOULD MEET THE REQUIREMENTS OF ITEM 5 STATED MECHANICAL PERFORMANCE SHOULD REMAIN TO NORMAL
9-1 COLD
9-2 DRY HEAT
70 2
FOR 96
1. 2. 3.
HOURS
THE CONTACT RESISTANCE SHOULD BE LESS THAN 300 m IT SHOULD MEET THE REQUIREMENTS OF 5-2 AND 5-3 MECHANICAL PERFORMANCE SHOULD REMAIN TO NORMAL THE CONTACT RESISTANCE SHOULD BE LESS THAN 300 m THE INSULATION RESISTANCE SHOULD BE HIGHER THAN 10 M DIELECTRIC STRENGTH SHOULD MEET 5-3 STATED MECHANICAL PERFORMANCE SHOULD REMAIN TO NORMAL
9-3 DAMP HEAT
40 2 FOR 96 HOURS
1. 2. 3. 4.
10. LED SPECIFICATIONS LED SPECIFICATIONS WILL BE FURNISHED DEPENDING ON DIFFERENT LED COLOR DEMAND
sales@greatecs.com www.greatecs.com 3
Pushbutton Switches
Silent Pushbutton Switch with LED PB59 Series
sales@greatecs.com
www.greatecs.com
4
