UB225SKW036CF-4J01

Illuminated Switches Bicolor illuminated Pushbutton Switches with Alternating Legends (6.1) .240 3 UB2 Series (1.0) .039 (1.0) .039 3 N.C. N.C. LC N.C. (15.0) Sq .591 (5.08) Typ .200 (1.0) .039 (2.54) Typ .100 (0.5) Typ .020 LC 6 5 N.C. 2 L2 N.O . COM L1 N.O. COM (5.08) .200 2 L2 N.O. COM L1 N.O . COM (5.08) .200 1 1 4 (15.24) Sq .600 (1.5) .059 UB225SKW036CF-4J01 Bicolor LED Straight PC (3.0) .118 (0.5) .020 (7.0) (10.0) (4.0) .276 .394 .157 Latchdown Position (1.0) .039 (2.54) .100 (5.08) .200 (2.54) .100 (1.0) Ty p .039 (5.08) Typ .200 Single Pole (1.0) .039 3 LC N.C. L2 Double Pole (1.0) .039 3 LC N.C. L2 (0.8) x (1.6) Ty p .032 x .063 6 5 (15.0) Sq .591 (5.08) Typ .200 (1.0) .039 N.C. 2 N.O . COM L1 N.O. COM (5.08) .200 N.C. 2 N.O. COM L1 N.O. COM (5.08) .200 1 1 4 (19.0) Sq .748 (1.5) .059 UB216KKW016CF-4J02 POLE & CIRCUITS Bicolor LED Solder Lug Connected Terminals Normal Down (1.4) (4.0) .055 .157 (15.5) (5.0) .610 .197 Latchdown Position (2.54) Typ .100 (0.5) Typ .020 (2.0) .079 (2.54) .100 (5.08) .200 (2.0) Typ .079 (2.54) .100 (5.08) .200 Single Pole Double Pole Plunger Position Normal Down Throw & Switch/Lamp Schematics CUTAWAY Pole Model Notes: Switch is marked with NC, NO, COM, L+ & L-. Lamp circuit is isolated and requires an external power source. 1 COM (+) (-) SP UB215 UB216* UB225 UB226* ON ON ON ON (ON) ON (ON) ON 1-3 1-2 SPDT 3 1 COM NC 2 NO 4 COM 5 NO (+) (-) DP 1-3 4-6 1-2 4-5 DPDT 3 NC 2 NO 6 NC When in latchdown position for the alternate circuit, cap positions above the housing are: 1.5mm for snap-in models & 7.0mm for PCB models. How to order: General Specifications: 3 4 5 6 7 8 ELECTRICAL CAPACITY (Resistive Load) » Power Level (code W): 5A@125/250VAC or 5A@30VDC » Logic Level (code G): 0.4VA max.@28V AC/DC max. (Applicable Range 0.1mA~0.1A@20mV~28V) OTHER RATINGS: » Contact Resistance: 50mΩ max. for silver; 100mΩ max. for gold » Insulation Resistance: 200MΩ min.@500VDC » Mechanical Life: 1,000,000 operations min. for momentary; 200,000 operations for alternate action » Electrical Life: 10,000 operations min. for silver; 200,000 operations min. for gold » Norminal Operating Force: SP: 1.90N; DP: 2.55N » Contact Timing: Break-before-make » Travel: Pretravel: 1.7mm; Overtravel: 0.6mm; Total: 2.3mm MATERIALS » Movable Contacts & Stationary Contacts: Silver alloy or copper with gold plating » Switch Terminals: Phosphor bronze with silver or gold plating » Lamp Terminals: Brass with silver plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +50°C UB2 1 2 5 6 1 2 1 2 POLES: SPDT DPDT CIRCUITS: ON-(ON) ON-ON (Alternate Action with Latchdown) MOUNTING TYPES: Square (PCB Mounting) Square (Snap-in Mounting, Standard with Solder Lug terminals) CONTACTS & RATINGS: Silver Rated 5A @ 125/250 VAC Gold Rated 0.4VA max @ 28V AC/DC max TERMINALS: Solder Lug (for Snap-in Mounting) Straight PC 6CF 1JB 2B 3JB 4J 5J 8 7 6 LED: red/green Super Bright Bicolor LED CAP TYPES & COLORS: Sculptured Cap: Clear Diffuser Color: White Beveled Cap & Color: White Flat Cap Lens: Clear Diffuser Color: White Sculptured Cap with Alternating Legend Filter: Clear Lens Flat Cap with Alternating Legend Filter: Clear Lens ALTERNATING LEGENDS: ON/OFF START/STOP OPEN/CLOSE SK KK 4 3 W G 01 02 5 01 02 04 LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. Amber can be achieved by simultaneous illumination of red & green, but is not suitable for Alternating Legends. Bicolor with 2 LC (+) elements L1 (-) Red L2 (-) Green 6CF Super Bright Bicolror Red/Green 30/25(25/22 for Amber) mA 20/20 mA 2.1/3.5 V 4/4 V 0.40/0.33 mA/°C -25°C ~ +50°C SOLDERING » Manual Soldering: 4 seconds max. @ 410°C max. » Wave Soldering (PC version): t2 T2 See Profile: T1 0 t1 t3 Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage IFM IF VF VRM t = s econ d s Current Reduction Rate Above 25°C ∆IF Ambient Temperature Range Depending on the material and thickness of the PCB, surface temperatures may vary. If the process exceeds the wave soldering limits in this graph, contact us for further information. P r o le A sales@greatecs.com www.greatecs.com Illuminated Switches Illuminated Switches Bicolor illuminated Pushbutton Switches with Alternating Legends MOUNTING TYPES & SHAPES SK PCB Mounting, Square Shape SP, Bicolor LED (5.08) .200 LC+ UB2 Series KK DP, Bicolor LED (5.08) Typ .200 6 LC+ Snap-in Mounting (Solder Lug), Square Shape with Built-in Bezel 3 2 (2.54) Typ .100 (10.16) .400 (1.2) Dia Ty p .047 3 2 (2.54) Typ .100 (10.16) .400 (1.2) Dia Ty p .047 (17.4)Sq Sq .685 (5.08) .200 (2.54) .100 L2- L11 (5.08) .200 5 L24 L1- 1 C L (2.54) .100 C L Panel Thickness: 1.0 ~ 3.2 mm SWITCH & LAMP TERMINALS 01 Solder Lug For Switch The 0.8mm x 1.6mm oblong terminal hole accommodates 2 solid or stranded 24-gauge wires. (0.2) .008 (1.6) .063 (5.0) .197 (1.0) .039 Thk = (0.5) .020 03 For Super Bright Bicolor LED (0.2) .008 (4.0) .157 Straight PC For Super Bright Bicolor LED (0.2) .008 (4.0) .157 (1.0) .039 Thk = (0.5) .020 For Switch (0.2) .008 (4.0) .157 (1.0) .039 Thk = (0.5) .020 (2.0) .079 (0.8) .032 Thk = (0.5) .020 1JB AT3074 Scupltured (6.1) .240 2B AT3075 Beveled 3JB (5.6) .220 AT3076 Flat (5.6) .220 Clear Lens Translucent White Di user (15.0) Sq .591 FPO Translucent White Cap Clear Lens Translucent White Di user (15.0) Sq .591 (15.0) Sq .591 4J AT3069 Scupltured with Alternating Legend Filter (6.1) .240 5J AT3070 Flat with Alternating Legend Filter Clear Lens Alternating Legend Filter Translucent White Di user (15.0) Sq .591 Clear Lens Alternating Legend Filter Translucent White Di user Lens Finish: Glossy (5.6) .220 (15.0) Sq .591 Lens & Di user Material: Polycarbonate Filter Material: Polycarbonate STANDARD ALTERNATING LEGENDS FOR SCULPTURED OR FLAT CAPS 01 Green Red Green 02 Red Green 04 Red ON OFF START STOP OPEN CLOSE Alternating Legend: ON/OFF Alternating Legend: START/STOP Alternating Legend: OPEN/CLOSE Contact us for other Alternating Legends. Legend illustrations are approximate repressentations of the actual characters on the filters. sales@greatecs.com www.greatecs.com Illuminated Switches CAP TYPES & COLOR COMBINATIONS