G1116

ISSUED DATE :2006/06/06 REVISED DATE : The G1116 is a low dropout at positive adjustable or fixed-mode regulator with minimum of 0.6A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. G1116 is also well suited for other applications such as VGA cards. G1116 is guaranteed to have lower than 1.3V dropout at full load current making it ideal to provide well regulated outputs of 1.25V to 5.0V with up to 12V input supply. 0.6A Low Dropout Positive Adjustable or Fixed-Mode Regulator Description G 111 6 Features & 1.3Vmaximum dropout full load current &Fast transient response &Output current limiting &Built-in thermal shutdown &Good noise rejection &3-Terminal Adjustable or Fixed 1.5V,1.8V,2.5V,3.3V,5.0V Applications & peripheral PC &Communication Package Dimensions D TO-92 E S1 A b1 SEATING PLANE REF. A S1 b b1 C e1 e b C Millimeter Min. Max. 4.45 4.7 1.02 0.36 0.51 0.36 0.76 0.36 0.51 REF. D E L e1 e Millimeter Min. Max. 4.44 4.7 3.30 3.81 12.70 1.150 1.390 2.42 2.66 Typical Circuit G1116 L Page: 1/4 ISSUED DATE :2006/06/06 REVISED DATE : Block Diagram Pin Descriptions Name Adj (GND) Vout Vin O I I/O Pin# 1 2 3 Function A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground only for fixed mode) The output of the regulator. A minimum of 10uF capacitor (0.15 ESR 20 ) must be connected from this pin to ground to insure stability. ESR 20 ) The input pin of regulator. Typically a large storage capacitor (0.15 is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than Vout in order for the device to regulate properly. Absolute Maximum Ratings Symbol VIN PD TST TOP Parameter DC Supply Voltage Power Dissipation Storage Temperature Operating Junction Temperature Range Ratings -0.3 to 12 Internally Limited -65 ~ + 150 0 ~ + 150 Unit V : : G1116 Page: 2/4 ISSUED DATE :2006/06/06 REVISED DATE : Electrical Characteristics Parameter Reference Voltage G1116ADJ G1116-1.5 G1116-1.8 Output Voltage G1116-2.5 G1116-3.3 G1116-5.0 Line Regulation G1116-XXX G1116ADJ G1116-1.5 Load Regulation G1116-1.8 G1116-2.5 G1116-3.3 G1116-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current Adjust Pin Current Quiescent Current Thermal Regulation Ripple Rejection G1116-XXX G1116-XXX Adjustable model Adjustable model Conditions Io=10mA, TJ=25 : , (VIN-VOUT )=1.5V Io=10mA, TJ=25 : , 3.0V VIN 12V Io=10mA, TJ=25 : , 3.3V VIN 12V Io=10mA, TJ=25 : , 4.0V VIN 12V Io=10mA, TJ=25 : , 4.8V VIN 12V Io=10mA, TJ=25 : , 6.5V VIN 12V Io=10mA, VOUT+1.5V< VIN