GI88L02

Pb Free Plating Product ISSUED DATE :2006/01/05 REVISED DATE : GI88L02 Description N-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID 25V 5m 88A The GI88L02 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The through-hole version (TO-251) is available for low-profile applications and suited for low voltage applications such as DC/DC converters. *Low Gate Charge *Simple Drive Requirement *Fast Switching Features Package Dimensions TO-251 REF. A B C D E F Millimeter Min. Max. 6.40 6.80 5.20 5.50 6.80 7.20 7.20 7.80 2.30 REF. 0.60 0.90 REF. G H J K L M Millimeter Min. Max. 0.50 0.70 2.20 2.40 0.45 0.55 0.45 0.60 0.90 1.50 5.40 5.80 Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current, VGS@10V Continuous Drain Current, VGS@10V Pulsed Drain Current 1 Symbol VDS VGS ID @TC=25 : ID @TC=100 : IDM PD @TC=25 : Tj, Tstg Ratings 25 ±20 88 55 321 96 0.77 -55 ~ +150 Unit V V A A A W W/ : : Total Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Thermal Data Parameter Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max. Max. Symbol Rthj-case Rthj-amb Value 1.3 110 Unit : /W : /W GI88L02 Page: 1/5 ISSUED DATE :2006/01/05 REVISED DATE : Electrical Characteristics (Tj = 25 : unless otherwise specified) Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Symbol BVDSS BVDSS / Tj Min. 25 1.0 - Typ. 0.037 45 50 5.5 38 10.5 84 38 115 1660 1000 400 Max. 3.0 ±100 1 25 5 10 - Unit V V/ : V S nA uA uA m Test Conditions VGS=0, ID=250uA Reference to 25 : , ID=1mA VDS=VGS, ID=250uA VDS=10V, ID=40A VGS= ±20V VDS=25V, VGS=0 VDS=20V, VGS=0 VGS=10V, ID=40A VGS=4.5V, ID=28A ID=40A VDS=20V VGS=5V VDS=15V ID=25A VGS=10V RG=3.3 RD=0.6 VGS=0V VDS=25V f=1.0MHz Gate Threshold Voltage Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 : ) Drain-Source Leakage Current(Tj=150 : ) VGS(th) gfs IGSS IDSS Static Drain-Source On-Resistance Total Gate Charge2 Gate-Source Charge Gate-Drain (“Miller”) Change Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance RDS(ON) Qg Qgs Qgd Td(on) Tr Td(off) Tf Ciss Coss Crss nC ns pF Source-Drain Diode Parameter Forward On Voltage 2 Symbol VSD IS ISM 1 Min. - Typ. - Max. 1.26 88 321 Unit V A A Test Conditions IS=88A, VGS=0V, Tj=25 : VD=VG=0V, VS=1.26V Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Notes: 1. Pulse width limited by safe operating area. 2. Pulse width 300us, duty cycle 2%. GI88L02 Page: 2/5 ISSUED DATE :2006/01/05 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Maximum Drain Current v.s. Case Temperature GI88L02 Fig 6. Type Power Dissipation Page: 3/5 ISSUED DATE :2006/01/05 REVISED DATE : Fig 7. Maximum Safe Operating Area Fig 8. Effective Transient Thermal Impedance Fig 9. Gate Charge Characteristics Fig 10. Typical Capacitance Characteristics Fig 11. Forward Characteristics of Reverse Diode GI88L02 Fig 12. Gate Threshold Voltage v.s. Junction Temperature Page: 4/5 ISSUED DATE :2006/01/05 REVISED DATE : Fig 13. Switching Time Circuit Fig 14. Switching Time Waveform Fig 15. Gate Charge Circuit Fig 16. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GI88L02 Page: 5/5