GSC6679

Pb Free Plating Product ISSUED DATE :2005/08/04 REVISED DATE :2006/10/27C GSC6679 P-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID -30V 10m -14A The GSC6679 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The SOP-8 package is universally preferred for all commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. *Simple Drive Requirement *Lower On-resistance *Fast Switching Characteristic Description Features Package Dimensions REF. A B C D E F Millimeter Min. Max. 5.80 4.80 3.80 0° 0.40 0.19 6.20 5.00 4.00 8° 0.90 0.25 REF. M H L J K G Millimeter Min. Max. 0.10 0.25 0.35 0.49 1.35 1.75 0.375 REF. 45° 1.27 TYP. Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Continuous Drain Current Pulsed Drain Current 1 3 3 Symbol VDS VGS ID @TA=25 : ID @TA=70 : IDM PD @TA=25 : Tj, Tstg Ratings -30 ±25 -14 -8.9 -50 2.5 0.02 -55 ~ +150 Unit V V A A A W W/ : : Total Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Thermal Data Parameter Thermal Resistance Junction-ambient 3 Symbol Max. Rthj-amb Value 50 Unit : /W GSC6679 Page: 1/4 ISSUED DATE :2005/08/04 REVISED DATE :2006/10/27C Electrical Characteristics (Tj = 25 : unless otherwise specified) Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Symbol BVDSS BVDSS / Tj Min. -30 -1.0 - Typ. -0.03 26 37 3 25 13 11 58 43 2860 950 640 Max. -3.0 ±100 -1 -25 10 13 60 4580 - Unit V V/ : V S nA uA uA m Test Conditions VGS=0, ID=-250uA Reference to 25 : , ID=-1mA VDS=VGS, ID=-250uA VDS=-10V, ID=-14A VGS= ±25V VDS=-30V, VGS=0 VDS=-24V, VGS=0 VGS=-10V, ID=-14A VGS=-4.5V, ID=-11A ID=-14A VDS=-24V VGS=-4.5V VDS=-15V ID=-1A VGS=-10V RG=3.3 RD=15 VGS=0V VDS=-25V f=1.0MHz Gate Threshold Voltage Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 : ) Drain-Source Leakage Current(Tj=70 : ) VGS(th) gfs IGSS IDSS Static Drain-Source On-Resistance2 Total Gate Charge2 Gate-Source Charge Gate-Drain (“Miller”) Change Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance RDS(ON) Qg Qgs Qgd Td(on) Tr Td(off) Tf Ciss Coss Crss nC ns pF Source-Drain Diode Parameter Forward On Voltage 2 2 Symbol VSD Trr Qrr Min. - Typ. 48 46 Max. -1.2 - Unit V ns nC Test Conditions IS=-2A, VGS=0V IS=-14A, VGS=0V dI/dt=100A/ s Reverse Recovery Time Reverse Recovery Charge Notes: 1. Pulse width limited by Max. junction temperature. 2. Pulse width 300us, duty cycle 2%. 3. Surface mounted on 1 in2 copper pad of FR4 board; 125 : /W when mounted on Min. copper pad. GSC6679 Page: 2/4 ISSUED DATE :2005/08/04 REVISED DATE :2006/10/27C Characteristics Curve Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristics of Reverse Diode GSC6679 Fig 6. Gate Threshold Voltage v.s. Junction Temperature Page: 3/4 ISSUED DATE :2005/08/04 REVISED DATE :2006/10/27C Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GSC6679 Page: 4/4