1A3

1A1 THRU 1A7 MINIATURE PLASTIC RECTIFIER VOLTAGE50 TO 1000V CURRENT 1.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension R-1 MECHANICAL DATA TerminalPlated axial leads solderable per MIL-STD 202E, method 208C CaseMolded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polaritycolor band denotes cathode Mounting positionany Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 1A1 50 35 50 1A2 100 70 100 1A3 200 140 200 1A4 400 280 400 1.0 25.0 1.1 1A5 600 420 600 1A6 800 560 800 1A7 1000 700 1000 units V V V A A V µA µA pF °C/W °C Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =25°C, Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operation Junction Temperature Note Vrrm Vrms Vdc If(av) Ifsm Vf Ir Cj R(ja) Tstg 5.0 50.0 15.0 50.0 -50 to +150 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted Rev.A4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1A1 THRU 1A7 1 1 Rev.A4 www.gulfsemi.com