1N4004E

1N4001E THRU 1N4007E GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension A-405 MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =75°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Typical Thermal Resistance Ta =25°C Ta =100°C (Note 1) (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Cj R(ja) Tstg 1N4 001E 50 35 50 1N4 002E 100 70 100 1N4 003E 200 140 200 1N4 004E 400 280 400 1.0 30.0 1.1 30.0 1N4 005E 600 420 600 1N4 006E 800 560 800 1N4 007E 1000 700 1000 units V V V A A V µA µA µA pF °C/W °C Storage and Operation Junction Temperature 5.0 50.0 15.0 50.0 -50 to +150 Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted 1 Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N4001E THRU 1N4007E 2 Rev.A6 www.gulfsemi.com