BYV27-2GE

BYV27-1GE THRU BYV27-2GE GLASS PASSIVATED JUNCTION ULTRAFAST EFFICIENT SILICON RECTIFIER VOLTAGE：100 TO 200V CURRENT： 2.0A FEATURE Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension DO-15/DO-204AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta =55℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 2.0A Peak non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Ta =25℃ Ta =125℃ (Note 2) (Note 3) (Note 4) Vrrm Vrms Vdc If(av) Ifsm Vf Ersm Ir Trr Cj R(ja) Tstg,Tj BYV27-1GE 100 70 100 2.0 50.0 0.98 20 5.0 150.0 25 15 45 -55 to +150 BYV27-2GE 200 140 200 units V V V A A V mJ μA μA nS pF ℃/W ℃ Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance Storage and Operating Junction Temperature Note: 1.L = 120 mH; Tj = Tj max prior to surge; inductive load switched off. 2.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 4.Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV27-1GE THRU BYV27-2GE 1 Rev.A1 www.gulfsemi.com