ER502N

ER502N ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE: 200V CURRENT: 5.0A FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency Glass passivated chip junction High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension DO-201AD MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 5A Peak Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time Typical Junction Capacitance (Note 1) (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Tstg,Tj ER502N 200 140 200 5.0 150.0 1.0 10.0 100.0 35 65 -55 to +150 units V V V A A V µA nS pF °C Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES ER502N Rev.A1 www.gulfsemi.com