ERB43-04

ERB43-04 FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 400V CURRENT:1.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C10sec/0.375”lead length at 5 lbs tension Fast switching for high efficiency DO- 41\DO-204AL MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted ERB43-04 400 280 400 1.0 30.0 1.3 10.0 100.0 110 15.0 50.0 -50 to +150 units V V V A A V µA nS pF °C/W °C Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Tstg,Tj Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES ERB43-04 Rev.A1 www.gulfsemi.com